Table of Contents
Advertisement
en Childproof lock
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
3.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When the dish is ready, switch off the appliance.
‒
Changing the cooking time
The cooking time can be changed at any time.
is highlighted in the display.
Requirement:
Change the cooking time using the
▶
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
The cooking time can be cancelled at any time.
is highlighted in the display.
Requirement:
Reset the cooking time to zero using the
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
12.4 Setting the end time
You can delay the time at which the cooking time is
due to end by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already op-
erating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and temperature or setting have
been set.
¡ A cooking time must be set.
13 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Note: After a power cut, the childproof lock will no
longer be active.
20
1.
2.
a The display shows the calculated end time.
3.
a After a few seconds, the appliance applies the set-
a Once the calculated start time has been reached,
button.
a When the cooking time has elapsed, a signal
4.
or
button.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
▶
button.
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end time at any time.
Requirement:
▶
a After a few seconds, the appliance applies the
12.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
off position.
1.
2.
a The time that is set appears in the display.
13.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
off position.
▶
Press repeatedly until
play.
Press the
or
button.
Use the
or
button to delay the end time.
ting and the display shows the set end time.
the appliance starts heating up and the cooking
time starts counting down.
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When the dish is ready, switch off the appliance.
‒
is highlighted in the display.
Use the
or
button to delay the end time.
seconds.
is highlighted in the display.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use
or to set the time.
Press .
To activate the childproof lock, press and hold the
button until appears in the display.
To deactivate the childproof lock, press and hold
‒
the button until goes out in the display.
is selected in the dis-
button.
button.
Advertisement
Table of Contents
