Summary of Contents for Harbor Freight Tools 99623
Page 1
Copyright 2008 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Model 99623 INSTRuCTIONS ®...
Maintain labels and nameplates on the Spreader. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur.
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY INSTRuCTIONS...
Page 5
Washer (34) and End Cap (35) for this Wheel. Install the other Wheel on the Axle and secure it in place with a Flat Washer (34) and End Cap (35). SKU 99623 For technical questions, please call 1-800-444-3353. LOCK NuT (24)
Page 6
Flat Washer (48) and Nut (21). Install the Gauge & Lever Assembly (4) on the left hand side, using two Bolts (11) and two Nuts (21). (See Figure g.) SKU 99623 For technical questions, please call 1-800-444-3353. PIVOT & ASSY.
Hopper (16) line up with the holes in the Shut Off Plate (27) prop- erly. (See Figures I and J.) SKU 99623 For technical questions, please call 1-800-444-3353. Pull up on the Adjust Handle (6) to its upper position, making sure the holes in the Hopper (16) and the holes in the Shut Off Plate (27) are 100% open.
Page 8
To prevent accidents, wash thor- oughly to remove all material in the Spreader. Allow the unit to dry. Then store the unit indoors out of children’s reach. SKU 99623 For technical questions, please call 1-800-444-3353. Suggested walking pattern at settings: (See Figure L.) START 11.
Problem Unit will not release material. Unit releases too much or too little material. Follow all safety precautions whenever diagnosing or servicing the Spreader. SKU 99623 For technical questions, please call 1-800-444-3353. AFTER USE, the Spreader. Pour leftover material back into its bag/container and seal the bag/container tightly.
PARTS LIST Part # Description Qty. Gear Box & Axle Assembly REV 09b SKU 99623 For technical questions, please call 1-800-444-3353. Page 10...
Page 11
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 99623 For technical questions, please call 1-800-444-3353. Page 11...