Argos Home 634/4557 D Assembly Instructions Manual

Tc facet towel rail

Advertisement

Quick Links

TC Facet Towel Rail
634 / 4557 D
– Please keep for future reference
Warning: To prevent breakage - Do Not press on to the glass back plate too hard when
assembling.
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1–06/10/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 634/4557 D and is the answer not in the manual?

Questions and answers

Summary of Contents for Argos Home 634/4557 D

  • Page 1 TC Facet Towel Rail Assembly Instructions 634 / 4557 D – Please keep for future reference Warning: To prevent breakage - Do Not press on to the glass back plate too hard when assembling. Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 1–06/10/16...
  • Page 2 Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • Keep children and animals • Dispose of all packaging carefully • D components and tools listed on away from the work area, small and responsibly.
  • Page 3 Components - Parts Please check you have all the parts listed below Towel rail Components - Fittings If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
  • Page 4 Assembly Instructions Step 1 WALL Decide upon position of items. Vertically position the flat side of the metal wall plate on the wall. Mark screw fixing hole positions as required. Note: Ensure gap in pin is Ensure gap in pin is on underside. on underside.
  • Page 5 Assembly Instructions Step 4 Loosen the grub screw as shown. Place the washer & WALL metal part over the back plate. Secure by tightening the grub screw as shown. Note: To prevent breakage - Do Not press on to the glass back plate too hard when assembling.

Table of Contents