Advertisement
4. Troubleshooting
Problem
Unit will not
There is not enough water in the
turn on
Water Tank. The AC adaptor is not
connected to a power supply.
No mist or
Not enough water? Too much
abnormal mist;
water? Dirt on the Ultrasonic plate?
Unit is leaking
Cover not installed properly? Dirt
water
on the air-suction port on the
underside of the base?
Water leakage
Cover not installed properly? Has
from product
the unit been tipped over? Low
temperature or high humidity?
5. Specifications
Product Size
Recommended Water Level
Product Weight
Accessories / Materials
Power Supply
Power / Suitable Area
* Automatically turns off when water levels are low.
Possible Cause
4.65'' height x 6.3'' diameter
200ml (MAX)
Approx. 480g (with adaptor)
Adaptor, User Manual / ABS, PP, PET
(Input) AC100-240V 50/60Hz / (Output) 24V 650mA
2
15.6W / 10-15m
Solution
Add water to the tank; Carefully disconnect the
AC adaptor from the DC Socket and the power
supply, check the cables, then reconnect.
Add a suitable amount of water in the tank.
Water must never be filled over 200 ML (MAX)
Line. Please refer to Maintenance instructions
and remove and re-install correctly so vapours
can be released freely. Clean the air suction port
of any dust. Restricted airflow will affect mist.
Remove and reinstall correctly, so vapours can
be released freely. Follow accidental leakage
instructions. Under these conditions, the mist
may condense quickly into water droplets.
Advertisement
