1. Manuals
  2. Brands
  3. Edgetech Manuals
  4. Fishing Equipment
  5. 5112
  6. User hardware manual

Edgetech 5112 ROPELESS FISHING SYSTEM User Hardware Manual

Hide thumbs Also See for 5112 ROPELESS FISHING SYSTEM:
Table of Contents

Advertisement

Quick Links

Download this manual
5112 ROPELESS FISHING SYSTEM
U S E R H A R D W A R E M A N U A L
0022081_REV_B
8/31/2021
EdgeTech
4 Little Brook Road
West Wareham, MA 02576
Tel: (508) 291-0057
Fax: (508) 291-2491
www.EdgeTech.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5112 ROPELESS FISHING SYSTEM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Edgetech 5112 ROPELESS FISHING SYSTEM

Summary of Contents for Edgetech 5112 ROPELESS FISHING SYSTEM

  • Page 1 5112 ROPELESS FISHING SYSTEM U S E R H A R D W A R E M A N U A L 0022081_REV_B 8/31/2021 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.EdgeTech.com...
  • Page 2 The information, figures, and specifications in this manual are proprietary. They are issued in strict confidence on condition that they not be copied, reprinted, or disclosed to a Third-Party, either wholly or in part, without the prior, written consent of EdgeTech. Any reproduction of EdgeTech supplied software or file sharing is strictly prohibited.

  • Page 3: Attention - Read This First

    ATTENTION – READ THIS FIRST! All personnel involved with the installation, operation, or maintenance of the equipment described in this manual should read and understand the warnings and cautions provided below. CAUTION! This equipment contains devices that are extremely sensitive to static electricity.

  • Page 4: Hardware Variations And Compatibility

    HARDWARE VARIATIONS AND COMPATIBILITY The 5112 Ropeless Fishing System contains both standard and proprietary hardware. At times, EdgeTech may change the standard components due to their availability or performance improvements. Although the component manufacturers and their models and styles may vary from unit to unit, replacement parts will generally be interchangeable.

  • Page 5: About This Document

    Purpose of this Manual The purpose of this manual is to provide the user with information on the setup and use of EdgeTech’s 5112 Ropeless Fishing System. Although this manual encompasses the latest operational features of the 5112 Ropeless Fishing System, some features may be periodically upgraded.

  • Page 6: Warranty Statement

    All equipment manufactured by EdgeTech is warrantied against defective components and workmanship for a period of one year after shipment. Warranty repair will be done by EdgeTech free of charge. Shipping costs are to be borne by the customer. Malfunction due to improper use is not covered in the warranty, and EdgeTech disclaims any liability for consequential damage resulting from defects in the performance of the equipment.

  • Page 7: Software Service Overview

    EdgeTech customers can download new software releases with modifications and enhancements from the EdgeTech Track Tracker Page at the Apple store and Google Play sites. Major software issues, should they occur, will be reported directly to the customer. New software releases consist of the following: Software enhancements that are not on the price list •...

  • Page 8: Returned Material Authorization

    Refer to the RMA number on all documentation and correspondences. All returned materials must be shipped prepaid. Freight collect shipments will not be accepted. All equipment should be adequately insured for shipping, but equipment belonging to EdgeTech must be insured for full value.

  • Page 9: Customer Service

    CUSTOMER SERVICE Customer service personnel at EdgeTech are always eager to hear from users of our products. Your feedback is welcome and is a valuable source of information that we use to improve these products continually. Therefore, we encourage you to contact EdgeTech Customer Service to offer any suggestions...

  • Page 10: Company Background

    — for the acquisition of underwater data, including marine, estuarine, and coastal applications — for over 50 years. EdgeTech responds to the needs of the Scientific, Naval, and Offshore communities by providing industry- leading equipment — such as Sub-Bottom Profilers, Side Scan Sonar, Acoustic Releases, USBL Positioning Systems, and Bathymetric Systems —...

  • Page 11: Table Of Contents

    TABLE OF CONTENTS ATTENTION – READ THIS FIRST! ......................iii Warnings, Cautions, and Notes ........................ iii HARDWARE VARIATIONS AND COMPATIBILITY .................. iv ABOUT THIS DOCUMENT ........................v Purpose of this Manual ..........................v Liability ..............................v Revision History ............................v WARRANTY STATEMENT ........................
  • Page 12 Installing Navionics Nautical Charts in Trap Tracker............3-21 3.2.3 Trap Tracker Settings and Options ..................3-25 Connecting Track Tracker device to BLEAT Deck Unit............. 3-27 Release Cage Setup ........................3-31 3.4.1 Lid-Lift Bungee Installation ....................3-31 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 13 xiii 3.4.2 Cage Lid Setup ........................3-32 3.4.2.1 48-Inch and 48-Inch XL Cage Lid Line Setup ............... 3-32 3.4.2.2 Lid Anti-Rotation Bungee Installation ................. 3-33 3.4.3 Rope Basket and Rope Installation and Setup ..............3-36 3.4.3.1 Cage Divider Installation ..................... 3-36 3.4.3.2 Rope and Rope Basket Setup ..................
  • Page 14 5.2.6 Reassembling the 5112 Release ..................5-101 5.2.7 Installing the 5112 Acoustic Release into an EdgeTech Configured Cage ......5-102 TROUBLESHOOTING ......................6-105 Cage Physically Deployed Without Deployment Button Being Pressed ........ 6-105 Unit Incorrectly Marked As Deployed ................... 6-109 Unit Already Deployed Message ...................

  • Page 15: List Of Figures

    LIST OF FIGURES Figure 1-1: 5112 Release and Transducer ....................1-1 Figure 1-2: NFC Tag ............................ 1-1 Figure 1-3: 48-inc 5112 RFS Configured Cages ..................1-2 Figure 1-4: 22.5-in 5112 RFS Configured Cage ................... 1-2 Figure 1-5: BLEAT System: Command Box, Junction Box, and Dunking Transducer ......... 1-3 Figure 1-6: BLEAT Portable System: BLEAT Portable and Transducer ............
  • Page 16 Figure 5-13: Battery Mounting Plate Removal ..................5-99 Figure 5-14: Battery Removal ........................ 5-100 Figure 5-15: Battery Mounting Plate Mounting..................5-100 Figure 5-16: Release Endcap and Mounting Plate Orientation ............. 5-101 Figure 5-17: 5112 Installation- Release Mounting Plates ..............5-102 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 17 xvii Figure 5-18: 5112 Installation- Release Upper Mounting Plate Support Post, Bolt Assemblies, and Transducer Cable Connector Locations ....................5-102 Figure 5-19: 5112 and Top Mounting Plate Installed ................5-103 Figure 5-20: Mounting Plate Notch Alignment ..................5-103 Figure 5-21: 5112 Installation- Threading [4] Bolt-Assemblies Attacking Top Mounting Plate to Cage5-103 Figure 5-22: 5112 Installation: Support Post Assembly .................
  • Page 18 Table 2-14: BLEAT Deck Box Power Specifications .................. 2-13 Table 2-15: Dunking Transducer Mechanical Specifications ..............2-15 Table 7-1: 5112 Cage Integration Kit ..................... 7-118 Table 7-2: 5112 Release Upgrade Kit ..................... 7-119 Table 7-3: 5112 Spare Kit ........................7-119 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 19: Overview

    1.0 OVERVIEW The EdgeTech 5112 Ropeless Fishing System (RFS) was designed with fishers to eliminate the need for a persistent vertical line to connect fishing gear to a surfaced buoy until just before retrieval. The intent is to alleviate possible whale and other marine-life entanglement and help prevent line tangles, cuts, tipped cages, and other adverse effects of seafloor to-surface lines.

  • Page 20: 5112 Configured Release Cages

    1.1.2 5112 Configured Release Cages Optional release cages with EdgeTech, Rope Basket, Line, and Floatation. EdgeTech currently offers preconfigured 22.5- , and cages. In addition, with parts and INCH INCH INCH KITS instructions are available for customers who want to build their own cages.

  • Page 21: Bleat Or Bleat Portable Deck Box And Transducer

    1.1.3 BLEAT or BLEAT Portable Deck Box and Transducer Figure 1-5: BLEAT System: Command Box, Junction Box, and Dunking Transducer Figure 1-6: BLEAT Portable System: BLEAT Portable and Transducer...

  • Page 22: Ios Or Android Trap Tracker Mobile Application

    1.1.4 iOS or Android Trap Tracker Mobile Application Figure 1-8: Trap Tracker Android Figure 1-7: Trap Tracker iOS 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 23: Specifications

    2.0 SPECIFICATIONS Specifications for the 5112 Ropeless Fishing System are provided in the subsections to follow. 2.1 5112 Acoustic Release Specifications 2.1.1 5112 Acoustic Release Mechanical Specifications SPECIFICATION VALUE Depth rating: 500 meters (1,640 feet) Maximum release load: 112 kg (247 lbs)

  • Page 24: 5112 Acoustic Release Standard Command Functions

    Table 2-4: Release Commands, Responses, and Command Functions 2.1.5 5112 Acoustic Release Environmental Specifications SPECIFICATION VALUE Operating: -10°C to + 40°C (14°F to + 104°F) Storage (Batteries removed): -20°C to + 60°C (14°F to + 104°F) Table 2-5: Acoustic Release Environmental Specifications 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 25: 5112 Acoustic Release Mechanical Drawings

    2.1.6 5112 Acoustic Release Mechanical Drawings 2.1.6.1 5112 Acoustic Release Drawing Figure 2-1: 5112 Release Mechanical Drawing pg.1 ICD-0021701...

  • Page 26: Figure 2-2: 5112 Release Mechanical Drawing Pg.2 Icd-0021701

    Figure 2-2: 5112 Release Mechanical Drawing pg.2 ICD-0021701...

  • Page 27: Legacy 5112 Acoustic Release Drawing (Discontinued)

    2.1.6.2 Legacy 5112 Acoustic Release Drawing (Discontinued) Figure 2-3: Legacy 5112 Release (Discontinued) Mechanical Drawing pg.1 ICD-0021701 Rev A...

  • Page 28: Figure 2-4: Legacy 5112 Release (Discontinued)Mechanical Drawing Pg.2 Icd-0021701 Rev A

    Figure 2-4: Legacy 5112 Release (Discontinued)Mechanical Drawing pg.2 ICD-0021701 Rev A...

  • Page 29: 5112 22.5-Inch Equipped Cage

    2.2 5112 22.5-Inch Equipped Cage SPECIFICATION VALUE Dimensions (LxWxH) 57.1 cm (22.5 in) x 57.1 cm (22.5 in) x 40.1 cm (16 in) Weight in Air 37.6 kg (83 lbs) Weight in Water 12.7 kg (28 lbs) Table 2-6: 22.5-Inch Cage Mechanical Specifications...

  • Page 30: Inch Cage Mechanical Drawing

    2.2.1 22.5-Inch Cage Mechanical Drawing Figure 2-5: 22.5-Inch Cage System ICD-0022380...

  • Page 31: 5112 48-Inch Equipped Cage

    2.3 5112 48-Inch Equipped Cage SPECIFICATION VALUE Dimensions (LxWxH) 122.9 cm (48 in) x 57.2 cm (22.5 in) x 41.2 cm (16 in) Weight in Air 50 kg (110 lbs) Weight in Water 15.4 kg (44 lbs) Table 2-7: 48 Inch Cage Mechanical Specifications...

  • Page 32: 48-Inch Cage Mechanical Drawing

    2.3.1 48-inch Cage Mechanical Drawing Figure 2-6: 48-Inch Cage System Mechanical Drawing ICD-0022382...

  • Page 33: 5112 48-Inch Xl Offshore Cage Equipped Cage

    2.4 5112 48-Inch XL Offshore Cage Equipped Cage SPECIFICATION VALUE Dimensions (LxWxH) 121.9 cm (48 in) x 57.2 cm (22.5 in) x 66 cm (26 in) Weight in Air 77 kg (170 lbs) Weight in Water 27 kg (60 lbs) Table 2-8: 48-Inch XL Offshore Cage Mechanical Specifications...

  • Page 34: 48-Inch Xl Offshore Cage Mechanical Drawing

    2-10 2.4.1 48-Inch XL Offshore Cage Mechanical Drawing Figure 2-7: 48-Inch XL Offshore Cage System Mechanical Drawing ICD-0023286...

  • Page 35: Bleat Deck Box

    2-11 2.5 BLEAT Deck Box 2.5.1 BLEAT Deck Box Mechanical Specifications SPECIFICATION VALUE 18.57 cm (7.31 in) x 7.62 cm (3.0 in) x 6.1 cm x (2.4 in) Control Box Dimensions (LxWxH) .91 kg (2 lbs) Control Box Weight 13.49 cm (5.31 in) x 8.26 cm (3.25 in) x 6.1 cm (2.4 in) Junction Box Dimensions (LxWxH) .70kg (1.5 lbs) Control Box Weight...

  • Page 36: Bleat Deck Box Drawing

    2-12 2.5.4 BLEAT Deck Box Drawing Figure 2-8: Bleat Command and Junction Box Mechanical/Electrical Drawing-0022384...

  • Page 37: Bleat Portable Deck Box

    2-13 2.6 BLEAT Portable Deck Box 2.6.1 BLEAT Portable Deck Box Mechanical Specifications SPECIFICATION VALUE Dimensions (LxWxH) 26.93 cm (10.6 in) x 24.50 cm (9.65 in) x 17.54 (6.91 in) 3.4 kg (7.5 lbs) Weight Table 2-12: Bleat Deck Box Mechanical Specifications 2.6.2 BLEAT Portable Deck Box Electrical Specifications SPECIFICATION VALUE...

  • Page 38: Bleat Portable Deck Box Drawing

    2-14 2.6.4 BLEAT Portable Deck Box Drawing Figure 2-9: BLEAT Portable Mechanical Drawing-0022383...

  • Page 39: 5112 Dunking Transducers

    2-15 2.7 5112 Dunking Transducers 2.7.1 Dunking Transducer Mechanical Specifications SPECIFICATION VALUE Transducer Size Kevlar reinforced cable: 20m (65.61ft) x 9.5mm (0.375 ft) Hydrophone: Diameter 71.4 mm (2.81 in), Length 78.7mm (3.10 in) Table 2-15: Dunking Transducer Mechanical Specifications...

  • Page 40: Setup And Activation

    3-16 3.0 SETUP AND ACTIVATION EdgeTech designed the 5112 Ropeless Fishing System to be easy to set up and activate for operation. Instructions for this process are provided in the subsections to follow. 3.1 BLEAT Deck Box Installation and Activation 3.1.1 BLEAT Deck Box Installation and Activation...

  • Page 41: Figure 3-2: Bleat Junction Box And Transducer Connection

    The Control Box will need to be installed within power cable length of a power source, and within • Bluetooth® range of the locations, Trap Tracker enabled devices will be used. EdgeTech suggests a Bluetooth® pairing distance no greater than 10 meters (33 feet).

  • Page 42: Bleat Portable Installation And Activation

    The BLEAT Portable is splash-proof; however, it should be installed in a dry area. • The BLEAT Portable Unit must be within Bluetooth® wireless range of Trap Tracker enabled devices. EdgeTech suggests a distance no greater than 10 meters (33 feet) 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 43: Figure 3-4: Bleat Portable Battery Installation

    3-19 The BLEAT Portable Unit must be deployed within a cable length that allows the transducer to be • lowered off the vessel's side and several meters below the draft. • Box and Cable Size and Weight specification and a drawing can be found in the LEAT ORTABLE section of this manual.

  • Page 44: Trap Tracker Mobile Application Installation And Subscription Activation

    5112 releases. 3.2 Trap Tracker Mobile Application Installation and Subscription Activation 3.2.1 iPhone /Android Trap Tracker The iPhone and Android versions of the Trap Tracker Application can be downloaded from Apple’s App Store and Google Play. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 45: Installing Navionics Nautical Charts In Trap Tracker

    (iPhone, iPad) or Android device 2. The App stores will be displayed. Click the 3. The Track Tracker purchase page will be search button and type “EdgeTech Trap displayed. To buy the application, press the Tracker” into the search field. When the blue button with the product’s price on it.
  • Page 46 Note: Currently, four up at the bottom of the screen. special characters / ? & " all are not able to be inputted on the iOS Navionics login (it’s a constraint in the Navionics login code) 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 47 3-23...
  • Page 48 Manipulate the size and shape of this box by pressing and dragging each dot with your finger until the desired chart area is created. Press the download button when ready. Your chosen Navionics map area should appear after a few minutes. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 49: Trap Tracker Settings And Options

    3-25 3.2.3 Trap Tracker Settings and Options Trap Tracker provides settings the fisher can use to switch measurement systems (U.S. Customary and Metric), change Deckbox-transponder settings, change account information, and change subscription information. To do so: 1. Select the three-line menu button at the top 2.
  • Page 50 Subscribed, a Trap Tracker Entry will exist that can be modified by selecting it. After any changes, press the Save Changes button to save them. In Android, simply select the settings you would like to use to save them. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 51: Connecting Track Tracker Device To Bleat Deck Unit

    3-27 3.3 Connecting Track Tracker device to BLEAT Deck Unit. Your device and the BLEAT Deck Unit are equipped to use Bluetooth® Wireless, but both must be on, positioned well, and paired to work correctly. Bluetooth® wireless technology is limited by range and can get blocked or degraded by metal structures or electrical interference.
  • Page 52 Bluetooth® wireless on, slide to radio switch right is marked as “On.” If it is off, the data on the right to green on position. block will display “Off.” Select the line to turn Bluetooth® wireless on. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 53 3-29 1. If using an Android® device, down- swipe on your home screen. Notice function and service buttons are displayed at the top and active if their button backgrounds are blue. Ensure the Bluetooth® emblem is active (blue). If not, press the button to turn it on.
  • Page 54 Scan button. page. A green checkmark will appear to the right of the device entry once connected. After the first pairing, it will always be listed under the Found header and will pair when in range. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 55: Release Cage Setup

    3-31 3.4 Release Cage Setup Setting or resetting the release cage involves packing the rope and float cover and arming the release for deployment. Both processes are designed to be fast, easy, and with minimal interference to normal fishing activities. 3.4.1 Lid-Lift Bungee Installation 3-6.

  • Page 56: Cage Lid Setup

    Be sure to install as shown in the photo to function properly during deployment and recovery. The lid line can remain in place unless damaged. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 57: Lid Anti-Rotation Bungee Installation

    3-33 Figure 3-8: 48-Inch Cage Knot Lid Line Attachment 3.4.2.2 Lid Anti-Rotation Bungee Installation The bungee's purpose is to secure the release knob in place when the system is armed. To do so, install a length of bungee (3/8” diameter) across the lid as shown in to intersect the release knob as IGURE 3-11.

  • Page 58: Figure 3-9: Anti-Rotation Bungee Installation

    3-34 Bungee Secured with Hog Rings Figure 3-9: Anti-Rotation Bungee Installation 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 59: Figure 3-10: Anti-Rotation Bungee Tight Enough To Hold Release Knob In Place But Loose Enough To

    3-35 Release Knob Figure 3-10: Anti-Rotation Bungee Tight Enough To Hold Release Knob In Place But Loose Enough to Maneuver Into Place Figure 3-11: Anti-Rotation Bungee Installation Objective-Holding Release Knob in Place...

  • Page 60: Rope Basket And Rope Installation And Setup

    Lid Line, tying a stop knot, and running the end of the line/rope through the line exit dent and connecting it with slack to the Bridle Loop. CAUTION! Always use the release cage with the basket installed. Not doing so will likely cause a release failure. To do so: 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 61: Figure 3-13: Rope Flaking Into Basket

    3-37 1. Flake the rope into the rope basket, leaving enough slack on each end to secure the top end to the floatation cover and the end coming from the bottom of the rope basket to the cage bridle. Figure 3-13: Rope Flaking into Basket 2.

  • Page 62: Figure 3-15: Rope Lock Knot Positioning

    3-38 3. Shackle the top end of the line to the cage lid if using an EdgeTech 22.5-inch cage. Tie or shackle to lid line if using EdgeTech 48-inch cages. Further instructions are provided in the ETUP section of this manual.

  • Page 63: Figure 3-17: Bridle And Exit Line Attachment

    3-39 5. If not already installed, a bridle line should be symmetrically attached to the cage. The exit line shackle should then terminate to the bridle line. There should be enough slack to not see tension when the bridle line is under load. Exit Line Exit Line With Slack...

  • Page 64: Cage Float Setup

    3-40 3.4.4 Cage Float Setup Floats should be attached to the top of the lid with accompanying long-line clips. EdgeTech has marked ideal clip locations by wrapping the mesh with tape or black marker. The clips can be connected between the seventh and eighth cage square from the 22.5-inch cage end, as shown in...

  • Page 65: Arming The 5112 Release

    3-41 Tape Marks Ideal Clip Locations Figure 3-21: Long Line Clip Location 3.5 Arming the 5112 Release The 5112 is armed when the release knob has been threaded onto the release, and the bungee has been fitted into the knob’s slot holding it in place. Instructions are as follows: 1.

  • Page 66: Figure 3-22: 5112 Bungee And Knob Installation

    Figure 3-22: 5112 Bungee and Knob Installation 2. Place bungee over the release knob and into the slot to hold it in place and prevent the knob from rotating. Figure 3-23: 5112 Bungee and Know Alignment 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 67: Dry Testing The System

    3-43 3.5.1 Dry Testing the System Two dry tests can be performed to ensure the unit responds to commands and sends back data to the Trap Tracker Application. The tests require that the unit is listed in the device’s Trap Tracker Underwater Units list.
  • Page 68 ONNECTING RACK RACKER DEVICE TO THE LEAT section of the manual to reconnect. 4. Scan the 5112 release NFC tag if this specific release hasn’t already been added to the Underwater Unit List. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 69 3-45 5. Go to the Underwater Unit List and select the specific unit.
  • Page 70 3-46 6. In the Unit Information Screen, Send the Status Command to the release by pressing the Status Command text in the release’s Underwater Unit information screen. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 71 3-47 7. Look at the Last Status section on the Unit Information Screen. Updated range, tilted and battery values should be populated.

  • Page 72: Release Command Test

    > > Tilt indicated? Contact closed? timer expired? Run for an < additional 100% of the elapsed time Set output low, send temperature < End release Figure 3-5: 5112 Acoustic Release: Release Test Flow Chart 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 73 3-49 Instructions: 1. Power on the BLEAT Unit and Transducer if using BLEAT Portable. 2. Scan the 5112 NFC tag if this specific release hasn’t already been added to the Underwater Unit list of Trap Tracker. 3. Go to the Underwater Unit List and then select 4.
  • Page 74 Press Ok to close the pop-up. Try again if a failure message is received. Review the flowchart for possible solutions. If CUSTOMER the test continues to fail, contact SERVICE for support. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 75: Operating Instructions

    4-51 4.0 OPERATING INSTRUCTIONS: 4.1 Cage Deployment: 4.1.1 Add the Release To Trap Tracker A release should be added to the Trap Tracker Underwater Unit List of any device used to send commands to it. Releases are added using an NFC scan-in function of the Trap Tracker software, or if the device is not NFC capable, the release can be entered manually.
  • Page 76 Trap Tracker Account used on the device you are using by deployment status and serial number. Next, press the Yellow Read Tag button and start scanning by moving the device above the tag face. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 77 4-53 5. The application will start scanning for a 6. The new unit will be added to the Underwater Units tag. You will see a Ready to Scan list on your device. message. Hold the top of the iPhone or rear center of the Android phone near the NFC tag...
  • Page 78 4-54 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 79: Manually Adding A Release Into Trap Tracker

    4-55 4.1.1.2 Manually Adding a Release Into Trap Tracker A release can be manually added to the Underwater Units List in Trap Tracker. To do so: 1. Select the three-line Trap Tracker Menu 2. Select Underwater Units from the left side Button.
  • Page 80 To find information on these parameters: Serial number: A required 10-digit number located on the card received with the product. • This number may also be found laser-etched on the release end cap, on the NFC tag on the 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 81 4-57 release, and in the Trap Tracker History of any device that has had the release listed as an underwater unit. Model Number: 4 digit model number. 5112 is currently the only model number used. • Date Manufactured: This can be found on the index card provided with the product. It may •...

  • Page 82: Deploy The Cage Or Line Of Cages And Mark Them As So In Trap Tracker

    1. Deploy the cage as you would any other fishing cage and immediately mark the cage as deployed in Trap Tracker. You want to try as soon as possible after the cage leaves the vessel, as the position recorded is that of the device's GPS location. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 83 4-59 2. Open Trap Tracker, go to Underwater 3. The unit information screen will appear. Units, and select the release deployed by Press the deploy button to change the selecting the serial number in the list. status of the cage to deployed. 4.
  • Page 84 A deployment Date and Time have been entered. entered. • A Cage Location latitude and longitude has been entered • A Trap Line Begin latitude and longitude has been entered. • A Trap Line End latitude and longitude have been entered. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 85: Cage Recovery

    4-61 4.2 Cage Recovery 4.2.1 Use Trap Tracker to Navigate Position of Cage Release The 5112 Release point location can be found by looking in the Unit Information Display or Chart Display in Trap Tracker. A best practice is to press the Update button in the Chart Display to ensure everything is up to date and the latest data is presented.

  • Page 86: Trap Tracker Chart Display

    Underwater Unit List on a chart display and any other 5112 equipped cages within five miles of the device when the updated button is pressed. This display can be connected to 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 87 4-63 that provides a useful and informative map background to help navigate to AVIONICS HART ERVICE release positions. To use: 1. Press the three-line Trap Tracker Menu button 2. The chart will appear. Notice your position and select Charts from the Trap Tracker menu. data is marked with the red arrow, and trap positions are marked with pins.

  • Page 88: Trap Tracker Underwater Unit Screen Position

    XPORTING section of this manual. ATA IN HARTS 4.2.1.3 Trap Tracker Underwater Unit Screen Position The Underwater Unit display for units provides the latitude and longitude of the location where the deploy button was pressed. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 89: Use Transducers And Trap Tracker's Status Command To Find A 5112 Release

    4-65 4.2.2 Use Transducers and Trap Tracker’s Status Command to Find A 5112 Release Once the fishing vessel is within sight of the marked position in Trap Tracker, deploy the deck box transducer and send Trap Tracker’s Status Command if needed to localize a submerged release to position the vessel in visual range of the surfacing point of the line float.

  • Page 90: Transducer Deployment And Usage

    7. Commands can be sent from Trap Tracker at this point. Transducer settings can be changed to meet different water and environmental conditions. These can be changed in the Trap Tracker Settings. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 91 4-67 To do so: 1. Select the three-line Trap Tracker Menu 2. Select Settings from the left side menu. button.

  • Page 92: Trap Tracker Status Update Function

    Last Status Line of the Unit Information Screen. The range value can be used to position the vessel in a good spot to send the Recovery Command and spot the floats and line when they surface. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 93 4-69 To do so: 1. In Trap Tracker, select the three-line Trap 2. The Underwater Units List will appear. Select Track Menu button and select Underwater the Unit to send the Status command to by Units from the Trap Tracker Menu. selecting the serial number text in its line.

  • Page 94: Use Transducer And Trap Tracker To Send The Recover Command

    When the release receives the recover command, the release mechanism will be activated. This disconnects the floatation cover from the cage, which then carries the rope to the surface for recovery. A range is transmitted as well. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 95 4-71 3. The Recovered window will be displayed. This Once completed, the Units information will be window gives a final range and allows you to updated. Notice that: enter the Catch Quantity and Trap Count values. Press Finish when complete. •...

  • Page 96: Trap Tracker Id Command

    4-72 4.2.4 Trap Tracker ID Command The Trap Tracker ID Command returns the serial number and range of the closest release in range. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 97 4-73 To do so: 1. In Trap Tracker, select the three-line Trap 2. The Underwater Units List will appear. Select Track menu button and select Underwater the three-dot Underwater Unit List options Units from the Trap Tracker menu. button on the top right side of the screen. 3.

  • Page 98: Sending Commands To Releases Not In The Underwater Units List

    ID, Status, and Release Commands. In the case of Status and Release Commands, a user must have the ten-digit command codes to use them. The release must be able to receive the acoustic signal to respond. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 99 4-75 To do so: 1. Select the three-line Trap Tracker menu 2. Select Underwater Units from the left side button. menu.
  • Page 100 4. To Send the ID Command, select Send ID upper right-hand side of the Underwater Units Command. This will return the ID of a release screen. that can receive the acoustic signal from a transponder. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 101 4-77 5. To send a Command to a specific release. Press the Send Command Manually Button. Send Command Manually pop- up will appear. Select either the ID, Status, or Release Command and enter the corresponding Command Code. Press send when complete.

  • Page 102: Post Deployment

    The Unit Serial XPORT numbers provided are for every unit used, even if not in the current Underwater Units list. This is useful in troubleshooting or manually units to an Underwater Unit List. To view: 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 103 4-79 1. Select the three-line Trap Track Menu button and select History from the Trap Tracker Menu.
  • Page 104 In the case of recoveries, recovery date, time, range to the unit, date and time of recovery command issued, temperature, user- provided catch quantities, and trap counts are displayed. This screen is scrollable for long histories. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 105: Deleting History

    4-81 4.3.1.1 Deleting History It is possible to remove the history of a single release or all releases associated with a Trap Tracker account. Caution- Removing the history of all units clears the data permanently. To remove the history of a single release: 1.
  • Page 106 4-82 2. When the history to be deleted is found, swipe left on the line. This will expose the Clear History button that can be pressed to delete the history of that specific unit. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 107 4-83 To remove the histories of many or all units: Caution- Removing the history of all units clears the data permanently. 1. Go to History in the Track Tracker Menu 2. The Underwater Unit History Screen will by selecting the three-lined Trap Track appear.
  • Page 108 If All is chosen, the user can delete all specific release's historical information to historical data associated with the clear by entering the serial number from account by selecting Delete. the list that appears and pressing Delete when complete. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 109: Removing A Unit From The Underwater Unit List

    4-85 4.3.2 Removing A Unit From The Underwater Unit List. A 5112 Release can be removed from an Underwater Unit list. Keep in mind that this list is not device- specific but account-specific and that any change will be replicated on any other device using the Trap Tracker account when synced.
  • Page 110 2. To delete a specific unit from the Underwater Unit list, left swipe its entry in the list, exposing the Delete button, and press it. Then, confirm your deletion by selecting Delete when the Delete Unit pop-up appears. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 111: Data Export

    4-87 4.3.3 Data Export 4.3.3.1 Exporting Historical Data Underwater Unit Historical data can be exported out of a device into CSV format. This data can then be organized, manipulated, and presented in a spreadsheet application like Microsoft Excel or imported into a database.
  • Page 112 The file can then be found and manipulated like any other .CSV flat file. A spreadsheet application such as Microsoft Excel® can be used to read, edit, and create data objects. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 113: Exporting Gpx Unit Data In Charts

    4-89 4.3.3.2 Exporting GPX Unit Data in Charts Unit chart data can be exported in a .gpx file format that many chart plotters can read. This is useful in planning and finding deployed releases. To do so: 1. Go to Trap Tracker Charts. 2.
  • Page 114 5. The file can be opened in a chart plotter that reads .gpx. The file can also be opened in a spreadsheet application such as Microsoft Excel to read, edit, and create data objects. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 115: Maintenance

    5.1 General Cleaning and Inspection The 5112 Ropeless Fishing System is rugged by design but should be cleaned and maintained to ensure proper function and long service life.

  • Page 116: Battery And O-Ring Replacement

    3. Unthread the [2] support posts from the 3/8-16 Bolts and Hex Nuts they are attached to. 4. Using socket and crescent wrenches, Unthread the [4] 3/8-16 Hex Nuts and [4] 3/8-16 split locking washers that fasten the top release mounting plate to the cage. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 117: Opening The 5112 Acoustic Release

    5-93 Figure 5-3: 5112 Support Post Unthreaded Figure 5-4: 5112 Removing [4] Top Plate Bolt from 3/8-16 Bolt Assembly Hex Nuts and Washers 5. Carefully lift the release by the mounting plate out of the cage. 5.2.2 Opening the 5112 Acoustic Release Opening the 5112 release requires pulling the purge plug, unthreading the release top, and sliding the top endcap with the attached electronics chassis out and away from the release and mounting plate.

  • Page 118: Figure 5-5 Release Orientation In Mounting Plate

    4. Use the strap wrench to hold the release body in place and the spanner wrench to unthread the end cap from the plate and release. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 119: Aa Battery Replacement Procedure

    5-95 Figure 5-6: Unthreading Release Endcap Using Spanner and Strap Wrenches 5. When completely unthreaded, pull the release end cap out. The end cap has an electronic board and batteries attached to it. Place this assembly down in a safe, dry area with consideration for the attached electronics.

  • Page 120: Figure 5-7: 5112 Release Main Sub-Assembly

    Instructions: [2] B 1. Disconnect the two battery power cables from the board. ATTERY OLDERS [2]P OWER ABLES [2] P OEM B OWER OARD ABLES Figure 5-8: 5112 Release Battery Replacement- Disconnecting Power 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 121: Figure 5-9: 5112 Release Battery Replacement-Mounting Plate Removal

    5-97 2. Unthread the screw securing the mounting bracket to the electronics assembly using a Philips screwdriver. Remove the battery holders. Figure 5-9: 5112 Release Battery Replacement-Mounting Plate Removal 3. Remove the electrical tape securing the batteries to the holder. LECTRICAL Figure 5-10: 5112 Battery Replacement Electrical Tap Removal 4.

  • Page 122: Figure 5-11: 5112 Release Battery Replacement- Battery Module

    Next, secure the battery holders to the electronics assembly by replacing the mounting bracket and threading the screw using a Phillips screwdriver. 6. Plug two cables back into two connectors at the board’s center. [2]P OWER ABLES Figure 5-12: 5112 Release Battery Replacement- Reconnecting Power 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 123: Legacy 9-Volt Battery Replacement Procedure

    5-99 5.2.4 Legacy 9-Volt Battery Replacement Procedure Four 9-Volt Batteries are plugged into the board and secured to it by a mounting screw and plate. Replacing them requires removing the plate, replacing the batteries, and then screwing the plate back in. Tools Required: Phillips Head Screwdriver Instructions:...

  • Page 124: Figure 5-14: Battery Removal

    3. Slide the mounting plate into place by reseating the tab in the slot and covering the 9-Volt batteries with the plate. Rethread the mounting screw using a screwdriver until the plate and batteries are secure. Figure 5-15: Battery Mounting Plate Mounting 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 125: O-Ring Replacement Information

    Inspect for scratches or nicks, which could impair the O-ring’s ability to provide a seal. Apply a light coat of O-ring lubricant(EdgeTech recommends Parker Super O-Lube). Be sure to use only silicone grease on the Housing and O-ring to facilitate insertion of the end cap. Make sure the lubricant is compatible with Nitrile rubber.

  • Page 126: Installing The 5112 Acoustic Release Into An Edgetech Configured Cage

    5.2.7 Installing the 5112 Acoustic Release into an EdgeTech Configured Cage The 5112 Acoustic Release can be installed into an EdgeTech configured cage by aligning the release with top plate with the bolt hardware and bottom mounting plate hole, lowering the release with top mounting plate into place, plugging the transducer cable in, and threading the release mounting plate bolt hardware and support posts.

  • Page 127: Figure 5-19: 5112 And Top Mounting Plate Installed

    5-103 [2] P LATE OTCHES ALIGNED Figure 5-20: Mounting Plate Notch Figure 5-19: 5112 and Top Mounting Plate Installed Alignment 2. Plug the transducer cable into the transducer cable connector on the release. 3. Thread the [4] locking washers and [4] hex nuts that fasten the top mounting plate to the cage using the socket and crescent wrench.

  • Page 128: Figure 5-23: 5112 Release, Top Mounting Plate, Bolt Hardware, And Support Posts Installed

    Figure 5-23: 5112 Release, Top Mounting Plate, Bolt Hardware, and Support Posts Installed 5. If the transducer needs to be installed, a mesh platform is built into EdgeTech cages. Then, the transducer can be secured to the platform using [4]Cable ties or hog rings.

  • Page 129: Troubleshooting

    6-105 6.0 TROUBLESHOOTING If the system requires troubleshooting, this section provides instructions for identifying and correcting operational problems. For questions or guidance with using this section, contact USTOMER ERVICE 6.1 Cage Physically Deployed Without Deployment Button Being Pressed If the cage was physically deployed without the deploy button being pressed and the user wants it to be deployed, press the Deploy button and then edit the location, so it’s correct.
  • Page 130 DD MM SS N/S, DDD MM SS E/W values below them, and the Yellow Save Changes Button is grayed out and unusable. You must fill in these values for the Save Changes button and function to be available. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 131 6-107...
  • Page 132 8. The unit’s Operational Details are now updated, Changes Button. and Status is deployed. You can now recover the release by pressing the Yellow Recover Button. This function deletes the accidental Recover data in this instance (from the History page 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 133: Unit Incorrectly Marked As Deployed

    6-109 6.2 Unit Incorrectly Marked As Deployed If a unit has been marked as deployed but isn’t meant to be, it can be fixed by changing the Deployed Status in the Unit’s Information Screen from “Yes” to “No.” To do so:...
  • Page 134 1. Go to the release’s Underwater Unit page and 2. The Edit Unit Screen will appear. Select the select the Edit button on the upper right side Deployed Text to change the value from “Yes” of the screen. to “No.” 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 135 6-111 3. You will see a confirmation pop-up displaying the unit’s serial number and asking to change the unit’s deployed status to “No.” Press Continue to make the change. This action reverts to the previous Recover data on the Underwater Unit Detail page. If there is no Recover data for whatever reason, it will leave the data blank, where the user can fill it in.

  • Page 136: Unit Already Deployed Message

    This message is informational only, and deployments and recoveries can proceed as usual. Conflict resolution is accomplished by contacting the second account owner and having them update the release status by manually changing its status to recovered. 5112 Ropeless Fishing System 0022081_REV_B...
  • Page 137 6-113 To do so: 1. Go to the Underwater Unit Screen 2. The Edit Unit screen will appear. To edit the for the release and select the Edit status, press the word Deployed. button. You will see a pop-up asking to confirm the deployment value to No.

  • Page 138: 5112 Release Not Found In Underwater Units List

    Select Cloud button or the Select Local button. Once selected, a record matching the user’s choice will overwrite the conflicting record resolving the sync conflict. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 139: Failed To Recover Message

    6-115 6.7 Failed to Recover Message If a Failed to Recover message is received, possible solutions are as follows: 1. Try the Recover Command again. 2. If the range value is significant, move the vessel closer or 5112 power settings to high, as explained in RACKER section of this...

  • Page 140: Trap Tracker Subscription Issues

    6.9 Trap Tracker Subscription Issues Trap Tracker subscriptions will auto-renew yearly. However, if there are issues or you would like to terminate a subscription, this can be done by going to Subscription Settings in Settings. 5112 Ropeless Fishing System 0022081_REV_B...

  • Page 141: The Trap Is Tilted Greater Than 45⁰

    6-117 6.10 The trap is Tilted Greater than 45⁰ The cages are designed to deploy without tilt but are subject to the risks of any deployed fishing cage. If a status command does return a tilted value, the solution is to recover the trap and redeploy. As long as the cage isn’t completely flipped, it can be recovered.

  • Page 142: Kits

    Cage assembly and integration kits are available for customers who would like to build their own cages and integrate EdgeTech’s 5112 Remote Fishing System technology into them. Each kit comes with the necessary hardware and instructions to build a 5112 enabled cage to EdgeTech cage specifications.

  • Page 143: Spares Kit

    7-119 PART NUMBER DESCRIPTION QUANTITY 0022359 HARDWARE SCREW STD HEX HD 3/8-16 X 2.5 INCH 316 SS 0007170 HARDWARE WASHER STD FLAT 0.375 316 SS 0007220 HARDWARE WASHER STD SPLIT LOCK 0.375 INCH 316 SS 0005300 HARDWARE NUT STD HEX 3/8-16 316 SS 0005245 HARDWARE BOLT STD CAP HEX HD 3/8-16 1.50 INCH 316 SS 0022372...

This manual is also suitable for:

5112

Table of Contents