Download Print this page

Stone & Leigh 67 CHS Instructions

Changing station

-67 CHS Changing Station Instructions

Your Stone & Leigh changing station is designed with your child's safety in

mind. It is certified to meet all safety guidelines established by ASTM

International and the CPSC-Consumer Product Safety Commission.

Thank you for purchasing a Stone & Leigh changing station. If you find that you

are missing a part or if a part is defective in any way, contact your Stanley

Furniture retailer for assistance.

Table of Contents

Need help?

Do you have a question about the 67 CHS and is the answer not in the manual?

Page 1 -67 CHS Changing Station Instructions Your Stone & Leigh changing station is designed with your child's safety in mind. It is certified to meet all safety guidelines established by ASTM International and the CPSC-Consumer Product Safety Commission. Thank you for purchasing a Stone & Leigh changing station. If you find that you are missing a part or if a part is defective in any way, contact your Stanley Furniture retailer for assistance.
Page 3 Page 3 -67 CHS Changing Station Attachment to Dresser Instructions Hardware Included: (2)Mending Plate-(C (4) 1/2" Wood Screws-(A) (2)Lock Washer 1/4"-(E ) (2)Flat Washer 1/4"-(D) (1)Allen Wrench 4mm- (F) Tools Required: (Not included) Phillips head screwdriver Assembly Instructions: 1. Assembly Hardware is bagged together and attached to the bottom panel of the Changing Station.
Page 4 Page 4 PRODUCT USE: Have any baby products that you will need, such as powder, wipes, etc., easily accessible. These items can be placed in the partitioned section on the right hand side of the Changing Station. Storage Area for Baby Products MAINTENANCE: Periodically check to make certain all screws are fastened securely.