M&S Systems MC960 Installation Manual

Your purchase of an M&S music system is an investment that will provide years of enjoyment and service for your
customer. M&S audio products are backed with more than 40 years of experience in the design and manufacture of
precision acoustical equipment for the home. To ensure that your customer receives the high-quality music and voice
reproduction that the system is designed to deliver, it is important that each step of the installation be done carefully. If
you follow the step-by-step illustrated instructions below, the result will be a successful professional-quality installation.
In the event you need troubleshooting assistance, please call our technical staff at 1-800-421-1587.
INSTALLATION INSTRUCTIONS
FINISH-OUT MC960 SYSTEM
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
Read instructions - All the safety and operating
instructions should be read before the appliance
is operated.
Retain instructions - The safety and operating
instructions should be retained for future
reference.
Heed warnings - All warnings on the appliance
and in the operating instructions should be
adhered to.
Follow instructions - All operating and use
instructions should be followed.
Water and moisture - The appliance should not
be used near water - for example; near bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the
like.
Attachments - Do not use attachments not
recommended by the product manufacture
as they may cause hazards.
Ventilation - The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be
situated on a bed, sofa, rug, or similar
surface that may block the ventilation
openings: or, placed in a built in installation,
such as a bookcase or cabinet that may
impede the fl ow of air to the ventilation
openings.
Heat - The appliance should be situated
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(including amplifi ers) that produce heat.
Power sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
Grounding or polarization - Precautions should
CONGRATULATIONS!
SAFETY INSTRUCTIONS
be taken so that the grounding or polarization
means of an appliance is not defeated.
Power lines - An outdoor antenna should be
located away from power lines.
Outdoor antenna grounding - If an outside
antenna is connected to the receiver, be sure
the antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70 1984,
provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection
to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
Object and liquid entry - Never push objects
of any kind into this product through openings
as they may touch dangerous voltage points
or short out parts that could result in a fi re or
electric shock. Never spill liquid of any kind on
the product.
The lightning fl ash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of suffcient magnitude to constitute a
risk of electric shock to persons.
Servicing - The user should not attempt to
service the appliance beyond that described in
the operating instructions. All other servicing
should be referred
personnel.
Damage requiring service - The appliance
should be serviced by qualifi ed service
personnel when:
■ The power supply cord or the plug has
been damaged; or
■ objects have fallen, or liquid has been
spilled into the appliance; or
■ The appliance has been exposed to
rain; or The appliance does not appear
to operate normally or exhibits a
marked change in performance; or
■ The appliance has been dropped,
or the enclosure damaged.
■ When the product exhibits a
distinct change in performance
- this indicates a need for service.
Replacement parts - When replacement
parts are required, be sure the service
technician has used replacement parts
specifi ed by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in
fi re, electric shock, or other hazards.
Safety check - Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
Wall or ceiling mounting - The product should
be mounted to a wall or ceiling only as
recommended by the manufacturer.
to qualifi ed service