Page 2
CHARGE FIRST! Before using your new Power Station T-300 or after storing it for more than 3 months, plug it into a suitable wall outlet until it is fully charged.Then you can start your exciting journey with it.
• DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V. • Always use approved attachment charging cables. we take no responsibility for any damage caused by using other brand charging cable. • When charging, please place the product on the ground with no flammable or combustible materials around.
USB-C Output Anti-collision Strip Air Intake Vent with Cooling Fan Note: No user-serviceable parts inside. Recommended to fully charge the T-300 before use. BUTTON FEATURE A: T-300 Power ON/OFF Button B: SOS mode & LED light Button C: DC Output Power ON/OFF Button...
7-9 hours when car running From Wall Charger 110V 6-7 hours Do not connect device via ac output port while charge the T-300.recommend to disconnect the T-300 when fully charged. WHAT IT POWERS Laptops (41.4Wh) 32" TV(60W) CPAP without heated Gopro (5.9Wh)
Page 6
AC Adapter Charging AC Adapter Charging It will take 6-7 hours to charge fully by using the AC adapter we provided. AC Outlet AC Adapter Solar Panel Charging Solar Panel Charging 1、DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V 2、Place Solar Panels in direct sunlight as much as possible.
“POWER ON/OFF” Button to shut down the output(s) when not in use. COOLING FAN T-300 utilizes an internal cooling fan to ensure the product is operating within the appropriate temperature range. T-300,when it experiences a higher output load, will automatically turn on the fan during discharge or recharging , the fan may operate intermittently to keep internal temperature within operating range.
Page 8
5-7 hours.When charging, the LCD Screen will be illuminated, and the LCD display will provide Battery level Indicator, T-300 is fully charged when the level is 100%. It is recommended to fully charge T-300 every 3 months to maintain the health of the battery pack.
EQUIPMENT CLEANING Please make sure that the device is disconnected from all input power and output devices. Wipe with a clean, dry, non-soft cotton cloth. Removing any foreign objects, dirt or other obstructions on the vents on both sides. When cleaning foreign objects in the side vents, do not allow debris, dirt or other Blockage enters the equipment.
Page 10
DO NOT CONNECTED DEVICE VIA AC OUTPUT WHILE CHARGE THE T-300. OVERLOAD CONDITION If an overload condition occurs on the OUTPUT port, T-300 will: Automatically turn off AC Output(6)power. The blue indicator light of LCD Screen(1)still illuminated. DC OUTPUT Status J still the same status as usual.
TROUBLE SHOOTING The device does not discharge: (1) Check whether the output buttons are activated ; (2) Check whether the total output power exceeds the rated output power; (3) Check whether the temperature of the equipment is too high. The device can not be charged: 1)Confirm that the wall plug power adapter's cord is inserted fully into the DC Input.
WARRANTY PERIOD The warranty period is 12 months, and the warranty period is calculated by the original consumer purchaser from the date of purchase. In order to determine the start date of the warranty period, a sales receipt from the first consumer purchase or other reasonable documentary proof is required.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 15
NOTE: A photovoltaic panel as an input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No.
Need help?
Do you have a question about the T-300 and is the answer not in the manual?
Questions and answers