Advertisement
Quick Links
SPA-QUICK START
CALSALT GUIDE
Steps:
Steps:
Step 1
Fill Spa using the Carbon Filter that was provided in the "CalSalt" Filtration Kit.
Step 2
Turn ON Spa and set "CalSalt" Filtration Chlorine time to Zero (0). See manual for Control
Panel settings configurations.
Step 3
Balance the Spa water levels (Use Test strips and Chemicals provided in Kit).
• Total Alkalinity, pH, Total Hardness, Total Chlorine.
PREFERRED LEVELS
2000-2500 ppm (3000 ppm for Swim Spa)
7.2-7.8
3.0-5.0
100-120 ppm
150-200 ppm
FACTORS
Salt
PH
Free Chlorine
Total Alkalinity
Calcium Hardness
Advertisement
Summary of Contents for Calspas CalSalt
- Page 1 Step 1 Fill Spa using the Carbon Filter that was provided in the “CalSalt” Filtration Kit. Step 2 Turn ON Spa and set “CalSalt” Filtration Chlorine time to Zero (0). See manual for Control Panel settings configurations. Step 3 Balance the Spa water levels (Use Test strips and Chemicals provided in Kit).
- Page 2 Step 5 After all Water levels are adequately balanced Turn ON Pump to Hi-Speed and add “CalSalt” bags (Reference: Step.4). Wait for the Salt to dissolve at least for an hour. Step 6 Remember to wait at least an hour before turning on Chlorine time to the recommended hour setup by Spa size.