Choosing The Power Sources; Connecting The Ac Power Cord; Using The Player On Batteries - Lenoxx Sound CD-105 Operating Instructions Manual

CHOOSING THE POWER SOURCES

You can use the AC power or batteries as a power source.
Battery compartment
TIP
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.
TIP
Replace the batteries
when the display dims or
when the player stops
operating. Replace all the
batteries with new ones.
Before you replace the
batteries, be sure to take
out the CD from the player
and remember to check the
Battery Safety Instructions
on Page 3.
All manuals and user guides at all-guides.com
AC SOCKET
1. Connecting the AC power
cord
Insert one end of the supplied AC power cord
(located in the battery compartment) into the socket
located at the rear of the player, and the other end
to the wall outlet.

2. Using the player on batteries

Insert 8 size “C” batteries (not supplied) into the
battery compartment.
To use the player on batteries, disconnect the AC
power cord from the player.
4
To a wall outlet
NOTE: One blade of plug
and outlet is wider.
IB-CD105(SY)-DG-E-041602