Table of Contents
Advertisement
Quick Links
Table of Contents
• Overview
• Features and Benefits
Overview
The Strip Savvy Square Up Ruler by QuiltCut is designed to make strip cu�ng fast and accurate without measuring or the need to
reposi�on your ruler. The Strip Savvy Ruler is made in the USA from ultra-flexible, clear, resilient material to provide years of use.
Page 1
Shoreline, WA USA
www.quiltcut.com
Made in the USA
Advertisement
Table of Contents
Related Manuals for QuiltCut Strip Savvy Square Up QC2-SU
Summary of Contents for QuiltCut Strip Savvy Square Up QC2-SU
- Page 1 Overview The Strip Savvy Square Up Ruler by QuiltCut is designed to make strip cu�ng fast and accurate without measuring or the need to reposi�on your ruler. The Strip Savvy Ruler is made in the USA from ultra-flexible, clear, resilient material to provide years of use.
- Page 2 Please contact us if you have any ques�ons, comments, or sugges�ons at: cs@quiltcut.com. Selec�ng a Rotary Cu�er Choose a standard 45 mm or 60 mm rotary cu�er with a manual blade guard and either a regular or ergonomic handle.
- Page 3 1. Place ruler over folded bulk fabric. 2. Locate Ver�cal “0” Cu�ng Slot. Bulk Fabric 3. Align ruler so fabric is slightly to the le� of the Ver�cal “0” Cu�ng Slot. 4. Posi�on ruler so bo�om edge of fabric aligns precisely with the Horizontal “0”...
- Page 4 ¼" Increment Strips You can also cut strips in increments of ¼". Cu�ng strips in ¼" increments requires two cu�ng passes. In the first pass, you cut strips at twice the final strip width. Then you adjust your ruler over the fabric, move it ¼" to the right, and cut the ini�al strips in half. The ¼"...
- Page 5 Cu�ng Pieced Strips Cu�ng squares and rectangles from pieced strips is a one pass process. See Figure 5. - Lay the pieced strips horizontally on a cu�ng mat. - Place the ruler on top of the pieced strips. Align the le� edge of the fabric just to the le� of the Ver�cal “0” Slot and visually align the seams of each pieced strip with the nearest horizontal line of the ruler.
- Page 6 Half-Inch Square Up Cu�ng Square up cu�ng requires two passes. For half-inch cu�ng, use the white lines forming squares emana�ng from the center of the ruler. You can use the ruler’s white diagonal lines to align priced blocks with diagonal seams. Use the ruler’s horizontal lines to align pieced blocks with horizontal seams.
Need help?
Do you have a question about the Strip Savvy Square Up QC2-SU and is the answer not in the manual?
Questions and answers