Temperature Adjustment - MTX 914249 User Manual

- Shake the cylinder several times to create the best pressure inside, so that gas is fed in a
normal way.
- Holding the cylinder with one hand, align and connect the clamper of the burner smooth-
ly and tightly with the slot on the ring holder on the cylinder, with the other hand.
- Make sure the nozzle is tightly connected to the cylinder.
- Turn the burner relative to the cylinder until tight clockwise (see pic. 1, 2, and 3).
- The nozzles are also to be disconnected when the valve is closed in the reverse order.
HOW TO IGNITE AND OPERATE
1) Use only butane and propane gas cylin-
ders of high quality.
2) Make sure the switching regulator is in
ON position.
3) In order to provide uniform feed of gas
IMPORTANT:
1) Propane gas cylinder contains liquid
propane. If you move, tilt, or turn the burn-
er together with the cylinder upside down
violently, the liquid can go to the valve, so
the burner, let the burner warm up for 3
minutes, and then smoothly adjust the
desired level of burning.

TEMPERATURE ADJUSTMENT:

1) To get the highest burning temperature,
adjust the length of
of the burner from 3.5 to 5 centimetres.
4
to the burner, shake the cylinder several
times.
4) Turn the pressure regulator anticlock-
wise for 2/3 of one turn.
5) Push piezo-ignition button, and the
ame is to burn instantly.
2) Make sure the burner is cool before fas-
ten or remove the burner head, as well as
before mounting or removing accessories.
3) Operation at cold temperature:
ame.
ame
burner and cylinder are at room tempera-
ame of
ture before using the burner.
can go out if you turn the burner upside
down.
Adjust the additional air supply valve to
ame
ENG
ame is
ame, wait until the
ame
ame length.