Advertisement
Quick Links
Advertisement
Related Manuals for Sencor NAC-3001DF
Summary of Contents for Sencor NAC-3001DF
- Page 1 NAC-3001DF DYNAMIC FACE MACHINE INSTRUCTIONS User Manual www.nordencommunication.com...
- Page 2 Note: The picture is for reference only, please refer to the actual product. Dear users, thank you for choosing our products. We will serve you with high-quality products to ensure that you use this product more smoothly. Please read this manual carefully before using it! Wiring Diagram: Wiring diagram of dedicated power supply for access control...
- Page 3 Wiring diagram of common power supply 2.2 Device Installation Steps: (1) Choose an appropriate face recognition height to determine the installation height of the device. After the installation height is determined, drill wire holes and fixing holes. (2) Use a screwdriver to remove the screws at the bottom of the fuselage (Picture 1) (3) Separate the equipment from the mounting plate (Picture 2)
- Page 4 Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 1. Enter Main Menu Enter Menu and select “User” In the initial interface, click the setting icon in the lower right corner. If you set up an administrator, you need to identify the administrator to enter.
- Page 5 2. User Management (1) User Registration Click "Users" , and " " at the bottom of the screen (Picture 1), enter the User ID and name and click " √ ". Then collect employee characteristics for registration (Picture 2). (2) Search User Click "Search"...
- Page 6 3. Data Management(DataMgt) (1) User Registration Click "DataMgt" to delete all logs, all users, all Manger Role or all data, password is 8282. Delete All Logs Delete all logs Delete All Users Delete all user & registration data Delete all administrator rights, but keep Delete All Manager Role registration data Delete All Data...
- Page 7 4. View Information(ViewInfo) (1) User Log Click “View Info” “User Log” Enter User ID Select the time period User Log, you can search all logs of this user ID during this time period. If you don’t input the user ID, only selecting the time period, you can search all logs of all users during this time period.
- Page 8 The firmware must be same series, with same firmware name in the device 6. Access Control Setting (Lock Ctrl) Click “LockCtrl” to enter access control setting(Time Setting, Users to Open, Unlock For, Sensor Type, Sensor Delay, Anti Passback, Alert Delay, Turn Off Alarm, Tamper Alert, Serial Settings) www.nordencommunication.com...
- Page 9 Time Setting The definition of the time interval for unlocking every day Require how many users to confirm before they can open Users to Open the door at the same time Time for device control the time to open or closed the Unlock For electric lock The type of door magnet: there are three types: No, Open...
- Page 10 7. Shifts (1) Dept. Click “Dept” to set shifts for department. (2) Shifts Click “Shifts” to set shifts. Can not set shifts for device with more than 5,000users (3) Rules Click “Rules”, you can set the time allowed to be late and the time allowed to leave early.
- Page 11 8. Network Click "Network" to enter the network settings (you can set the Dev. Name, ETH, WiFi, Port No. Net PWD, Server IP, Server Port, Push Server IP, Push Server Port, Real Time Req., NTP Address). When you need to start real-time monitoring, you must set the corresponding "Server IP"...
- Page 12 9. Settings (1) Date and Time Click "Date and Time" to revise the Date & Time in the device. You can also select “Auto SyncTime”. After the device is connected to the network, it will automatically synchronize the time to the device. (2) Display After the attendance check-in is successful, the time that the display...
- Page 13 3. Volume Click "Volume" to adjust the volume. 4. Set Bell Click "Set Bell" to set the time and frequency of ringing. 5. Wiegand Wiegand protocol input and output signal is Wiegand Wiegand Format 26 or Wiegand 34 The Wiegand protocol outputs the User ID. or Card Wiegand Output Number.
- Page 14 9. Reboot Click "Reboot" and then click "OK" , the machine will restart automatically. 10. Reset Default Click "Reset Default" and then click "OK" to initialize some parts of the settings. Reset Default will not clear user data and attendance logs! www.nordencommunication.com...