Page 2
SAFETY INSTRUCTIONS WHAT’S IN THE BOX DANGER WARNING CAUTION Failure to comply may Failure to comply may Failure to comply may lead to serious injury lead to serious injury lead to serious injury or death. or death. or death. • NEVER attempt to •...
Page 3
Helpful Hint: You can charge your unit and run your gear at the same time! HOW TO CHARGE When the X-100 is charging effectively, the LED light will be lit, and the highest battery indicator will flash to show the current battery level. Recharge via PD adapter 20V@2.25A : 120min.
Page 4
HOURS OF POWER SPECIFICATIONS HOW TO STORE Ideally, the power bank should be plugged in when not in use as it is the best way to keep it fully charged and ready to use in a moment’s notice. This prolongs battery life and will ensure your power bank is charged and ready to go all day, every day.
Page 5
TROUBLESHOOTING APPLICABLE EQUIPMENT Fault Code Possible Causes Solution LED battery light will flash at a Trigger temperature protection Use the power supply as frequency of 2 short and 1 long specified (0-40 degrees Celsius) at 0.5 Hz Flash for 30 seconds LED will blink at 4 Hz for 30 Low battery Use the power supply as...
Page 6
® e.) Once contacted by a Power Ridge representative you will be issued a warranty claim number. Be sure to keep this number at hand and refer to it at all times during the warranty review process.
Page 7
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the X-100 and is the answer not in the manual?
Questions and answers