unistara Home Series Assembly Instructions

Home Line - Semi Pro Line
1.
Build a strong masonry base considering the dimensions of the oven as per
following schedule:
Model
Base width A [cm/in]
Base length B [cm/in]
Base Heigth H [cm/in]
2.
Carefully level the surface and build a
(Pic.2)
3.
insulating bricks
Place the
necessary, with common wood cutting tools. (Fig.3)
Insulating bricks must be dry placed, without cement or other binders, and
without grouting the joints.
4.
Dry place the elements of the
centre(Pic.4).
5.
vault
Dry mount the
elements, using the mortar supplied in the kit (Pic.5).
6.
flue fitting
Glue the
insulating blanket
Assembly instructions
Rev. 03 - 28/10/2021

Instructions

brick curb
inside the tank made. You can cut them, if
cooking floor
and seal, only externally, all the joints between the
, then cover the entire dome of the oven with the
supplied in the kit (Pic.6).
www.unistara.com
Ø 80
135/53.1
135/53.1
100/39.4
, 10 cm high and 10 cm thick.
close each other to the
Masonry support
Ø 100 Ø 110 110 x 140
150/59.1 160/63.0
155/61.0 165/65.0
100/39.4 100/39.4
Pag. 1 / 2
180/70.9
200/78.7
100/39.4