User Instruction - Horizon Fitness HA 700 User Manual

5. USER INSTRUCTION

For your safety and proper use of the product, please read and understand the following
before use.
1. POWER BUTTON
· It turns on/off the power
· Air purifier will start with buzzer sound.
- Air volume will ser at 1
- While first 30 second pollution display section color of light change and will reset the
Dust/VOC sensor. In this stage, PM2.5 density will not display after 30 seconds total po-
llution rate and PM2.5 will display on purifier.
2. AIR VOLUME BUTTON
· Each time the user push the button air volume will change as this order.
stage1 > stage2 > stage3 > stage4 > repeat.
· Current air volume stage will display next to the fan sign by numbers.
Stage 1
3. TIMER BUTTON
· Reserve time to be off. Timer LED light will be on, and it will display set time.
Each time user push the button it will change set time in this order.
1H > 2H > 4H > 8H > 12H > OFF > repeat.
· When the timer is set the set time will display after 10 second, also user can check the set up
with timer LED light.
· Purifier will turn off after set a time.
4. SLEEP MODE
· It set the sleep mode. Air volume will decrease less than stage1, display light will get dimmer, and
buttons' buzzer sound will be off.
· Re-push the button will deactivate the sleep mode.
· Can use the timer during sleep mode by just pushing a timer button.
5. AUTO BUTTON
· It set the automatic air volume mode. It automatically changes the air volume by comprehensive
data from the VOC sensor and Dust sensor.
· It activate with 3 stages.
Good (blue) - stage1, Normal (green) - stage2, Bad (yellow)/Very bad (red) - stage 3.
6. ION BUTTON
· It activates the cluster ion generator, ion sign will lit up.
Stage 2 Stage 3
Stage 4