OVERVIEW The D3060 is a multi-function utility light. It mounts to most drones via Velcro attachments or is able to attach to drones by FoxFury saddle mounts. Its 30° and 60° dual LEDs can operate with a high, low, or strobe mode to provide omni-directional lighting.
BATTERY CHARGING THE BATTERY Connect the provided Micro USB Cable to the Charging Port and to a USB source. While charging, a red light will be on. Once charged, it will turn green. Charge time should be approximately 1.5 hours. WARNINGS: Unplug the light once charged to avoid impacting battery life.
Page 12
OPERATIONAL MODES OPERATIONAL MODES (CONT’D) Press the Dorsal Light Power/Mode Button once to turn the Dorsal Light on to HIGH. Press the Dorsal Light Power/Mode Button again to turn the Dorsal Light to LOW. Press the Dorsal Light Power/Mode Button again to turn the Dorsal Light to STROBE.
INSTALLATION MOUNTING D3060 TO SADDLE Align the 360° swivel with snap lock location on the desired mount location of the saddle, and snap D3060 light in place. Spin the light and tug to make sure it is properly atatched. (images below show D3060 attachment and then assembled to drone at various attachment locations of the saddle - top and side)
WARRANTY AND OTHER INFORMATION PRODUCT DURABILITY Do not use under the influence of drugs or alcohol. ONE YEAR WARRANTY FoxFury, LLC (“FoxFury”) warrants this product to be free from defects CARE/CLEANING in material for one year after Your FoxFury product is a professional purchase.
THIS IS THE ONLY WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT WHERE SUCH LIMITATION IS PROHIBITED BY LAW. You may have other specific legal rights which vary by jurisdiction.