Wet Sounds a link plus Owner's Manual

connection harness
Receiver Transmitter
(audio system)
(audio system)
phone or other
audio source
Congratulations!
Thank You for purchasing the
a link plus
Wet Sounds kit!
Wet Sounds products represent the ultimate
in high performance, element-proof audio.
Wet Sounds products are specifically
designed and engineered to withstand the
rigorous marine and outdoor environments.
a link plus
The Wet Sounds is a wireless
audio link that allows broadcasting from one
a link plus
audio system to another. Each
can be set to either send or receive audio as
needed.
a link plus
Up to four (4) units can be
bonded to receive the same audio from one
a link plus
(1) broadcasting , allowing for a
shared experience through multiple audio
systems.
Please take a moment to look over this
owners manual before enjoying the product.
w e t s o u n d s
a link plus
owner's manual
rev 1.0

controls / indicators

Status LED
RED
•Transmit Mode
GREEN
•Receive Mode
Battery LED
Orange Flashing
(1 sec on, 1 sec off)
•Low Battery
Orange Flashing Burst
(3 quick flashes)
•Critically Low Battery
Orange Solid
•Charging
Bond LED
Multi-Color - See
Essential Functions
page for more info.
Power Button Bond Button
Power ON Add / Delete Favorite
Hold a few seconds
Hold 1 sec
Power OFF Rotate thru Favorites
Hold until LEDs go off Click one (1) time
Enter Explore Mode
Switch Modes
(Transmit/Receive) Click two (2) times
Tap once while ON
Volume Down Volume Up

connectors / cables

black 3.5mm red 3.5mm
(female) (female)
micro USB charge
connector (female)