Advertisement
Quick Links
GasLab SAN-100 Micro Carbon Monoxide Monitor
The GasLab SAN-100 is a wearable, personal safety meter designed to monitor ambient
concentrations of carbon monoxide (CO) in real time. CO gas poisoning is the most common
type of fatal poisoning in the world.
Features
•
Silicone boot and metal clip are light and comfortable to wear.
•
Electrochemical sensor, no consumable parts.
•
Displays peak CO level until reset.
•
Lithium-ion rechargeable battery. USB Charging port.
•
Runs 10+ days per charge.
Applications
•
Heating and Ventilation. CO is produced by oxygen-starved combustion in improperly
ventilated fuel-burning appliances such as oil and gas furnaces, gas water heaters, gas
ovens, gas or kerosene space heaters, fire places and wood stoves.
•
Internal Combustion Indoors. CO is produced by all internal combustion engines. This
makes the SAN-100 useful in garages, car parks, venues, repair facilities or job sites where
cars, trucks or machinery is run indoors. Portable power generator use indoors.
•
Fire Fighters. CO is produced naturally in trace amounts by the partial oxidation of methane
in the atmosphere, volcanoes and forest fires.
Please take a moment to read these instructions before use. They will provide you with
all the necessary information for the correct use of your carbon monoxide monitor.
© Copyright 2017, CO2Meter, Inc. All Rights Reserved. Last modified March 15, 2018
User Manual
1
Advertisement
Summary of Contents for GasLab SAN-100
- Page 1 • Internal Combustion Indoors. CO is produced by all internal combustion engines. This makes the SAN-100 useful in garages, car parks, venues, repair facilities or job sites where cars, trucks or machinery is run indoors. Portable power generator use indoors.
-
Page 2: Operation
Theory of Operation The SAN-100 Carbon Monoxide Monitor uses an electrochemical sensor to determine the concentration of carbon monoxide in air. Air reaches the sensor by diffusing through the vent holes (see item 6 below). Normal air movement is enough to carry the sample to the sensor. -
Page 3: Specifications
Electrochemical sensors are cross-sensitive to specific gases other than the target gas of interest. While cross-sensitivities are limited, as much as possible by sensor design, some interactions still exist. The table below shows the most common cross-sensitivities. Gas Concentration SAN-100 Reading 200ppm 40ppm C2H4 (Ethene) -
Page 4: Cleaning And Storage
CLEANING AND STORAGE The front panel and case can be cleaned with a mild solution of detergent and water. Apply sparingly with a soft cloth and allow drying completely before using. Do not use aromatic hydrocarbons or chlorinated solvents for cleaning. TROUBLESHOOTING GUIDE Symptom / Issue Possible Cause / Resolution... - Page 5 (at our discretion) any part or product that fails under normal use. To take advantage of this warranty, the product must be returned to CO2Meter.com at your expense. If, after examination, we determine the product is defective, we will repair or replace it at no additional cost to you. This warranty does not cover any products that have been subjected to misuse, neglect, accident, modifications or repairs by you or by a third party.