Diametral AC250K1D Manual

MODEL:
Dear Customer,
Thank you for your decision to buy the Alternating Current Power Supply of model line
AC250Kxxx manufactured by our company. Thanks to this purchase you obtained high-quality
and efficient helper for your work. Please read this manual to allow him to serve you many
years without troubles.
The Alternating Current (AC) Power Supply controlled by a processor can be used especially
on the places, where is necessary to supply the power to different equipment by AC 0V÷255V.
Its characteristics can be evaluated especially by development technicians, repairmen of
consumer electronics, manufacturers and last but not least also by the vocational schools.
Output voltage is obtaining by transformation of the mains voltage 230V/50Hz by a separate
transformer. Thanks to it has the output voltage the clear sine continuance of 50Hz. The
regulation of the output voltage is in the voltage range of 0 ÷ 255V, with regulation step 1V and
maximal current output 1A or 2A - according to the model type.
Controlling of the power supply is maintained by the keyboard placed on the device head panel
or with the assistance of the personal computer and its D-View software, via the interface
RS232. Using of this D-View software allows you to define the processes depending on the
time and voltage without any stint. The power supply output is controlled by its own press
button with a pilot light for easy control. Pressing of any key is signalized by a sound signal.
The power supply is equipped with 3-figure display for set voltage values. The real voltage is
displayed by 3-figure digital measuring equipment.
The power supply output is made by socket for 230V/16A.
The transformer is sufficiently dimensioned for permanent supply of the maximal output to the
loading.
The model AC250Kx-S is additionally equipped with the stabilization of the output voltage,
limitation of the maximal voltage under a password, saving of the source statuses before
switching-off and their recovering after switching-on again.
Content:
I. The set contents
II. Technical parameters
III. Description of the operating elements
IV. Safety instructions
V. Work with the laboratory power supply
V.I. Voltage output setup
V.II. Accurate setting of the voltage output
V.III. Stabilization (only model AC250K1D-S and AC250K2D-S)
AC POWER SUPPLY
AC250K1D
AC250K1D-S
AC250K2D
AC250K2D-S
page 2
page 2
page 3
page 4
page 5
page 5
page 5
page 6
- 1 -