Using A Memory Card - Gigabyte M1405 User Manual

Emergency Release
In the event that the drive will not open, an emergency release will
need to be performed. Take a thin long item, such as a paper clip
and put it gently into the small hole on the side of the drive and
press inwards until the units drive clicks out. This should only be
performed if the drive is stuck and will not open at all using the
release button or the eject command in windows.

3.6 Using a Memory Card

How To: Insert a Memory Card
To Insert the Memory Card, place the front of the card (Contacts
facing down) into the card reader slot and push or click in (depending
on cards format). Your operating system should auto-play the card.
Remove a Memory Card
To remove the Memory Card, gently pull the card from the slot.
Ensure that the card is not being read from or written to when
removing.
M1405 SERIES USER'S MANUAL
19