Related Manuals for CASTLE NP10
Summary of Contents for CASTLE NP10
- Page 1 NP10 / NP15 / NP20 WIFI HEATER Instructions Manual Read instructions manual before use! Equipmart Ltd Kiam House Birchill Road Knowsley Ind. Park North Merseyside 0151 548 5500 L33 7TD www.castleheaters.co.uk...
-
Page 2: Important Safeguards
Please read and follow the instructions in this user manual even if you feel you are familiar with the product and find a place to keep it handy for future reference. NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests. - Page 3 • Do not operate the product with a damaged plug or cord. Return the complete product to the place of purchase for inspection, refund or replacement. • If the supply cord is damaged, the cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
-
Page 4: Before First Use
• Do not use the appliance for other than its intended use. • Do not leave the appliance unattended when switched on. • Always use the heater on a leveled surface. • Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of overheating). -
Page 5: Installation Cautions
ASSEMBLY INSTRUCTIONS This heater is intended for freestanding or wall mounting. It is not to be mounted on ceiling or floors. Choose a location where there is at least 1m clearance of either side from drapery or any other furnishing. INSTALLATION CAUTIONS: •... - Page 6 178mm 1. Ensure the heater is unplugged and power is switched off. 2. The distances between the two wall mounted brackets are 375mm (NP10), 575mm (NP15), 575mm (NP20). Check the assembly will be horizontal with a spirit level. 3. With a diameter of 8mm and depth of 40mm, insert the supplied anchors in the holes. Then use a screwdriver to tighten in the screws supplied with anchors.
-
Page 7: Control Panel And Display
CONTROL PANEL & DISPLAY CONTROL PANEL 1. Timer function: 0-6 hours of timing can be set 2. Increase setting: adjust temperature setting, timing setting, etc. 3. Power button: switch the heater on or put on standby 4. Child lock button 5. -
Page 8: Manual Operation
OPERATING INSTRUCTIONS NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not been used for a long period of time, the heaters may emit some smell and fumes. This will disappear when the heater has been on a short while. - Page 9 Tuya Smart App: 1. Open the Tuya Smart app, register and log in, then select Add Device. 2. Select Small Home Appliances from the product categories and select Heater...
- Page 10 3. Select the WIFI network you wish to connect to and enter your WIFI password. Press next, confirm that the indicator on the heater is in a fast flashing state and press next again. When the heater is successfully connected you will hear a beep from the heater. 4.
-
Page 11: Specifications
Ensure the appliance and all parts are thoroughly cleaned and dried before storage. We recommend storing the appliance in its original box or in a clean, dry place. SPECIFICATIONS Model Voltage Frequency Wattage NP10 220-240V~ 50/60Hz 1000W NP15 220-240V~ 50/60Hz...
Need help?
Do you have a question about the NP10 and is the answer not in the manual?
Questions and answers