iRobot Roomba s Series Owner's Manual page 14

Replacing the Bag
1
Lift up on the canister lid to open.
2
Pull up on the plastic card to remove
the bag from the canister.
Note: This will
seal the bag so
dust and debris
cannot escape.
3
Discard the used bag.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making
sure it is completely closed.
Note: To achieve optimal performance
with your robot and dirt disposal, clean
and/or replace your robot's filter as
needed.
Cleaning the IR Window
and Charging Contacts
Inspect the sensors
and charging contacts
to make sure they
are clear of debris.
Wipe with a clean,
dry cloth.
Note: Do not
spray cleaning
solution directly
onto sensors
or into sensor
openings.
Removing Debris
from Blower Cover
Inspect blower cover
for any lint or debris
built-up, and wipe
with a clean dry cloth
to remove.
Roomba s Series Owner's Guide
®
EN
9