Table of Contents
Advertisement
I
T
NSERTING A
APE
1. Press OPEN to open the Cassette/CD compartment.
2. Place a tape into position and gently press down.
3. Manually close the compartment door.
P
T
LAYING A
APE
1. Insert a tape.
2. Slide the FUNCTION switch to TAPE.
3. Press PLAY.
If the tape is not at the position you want to listen to, press one of the
FASTWIND buttons (
the tape, and then press PLAY.
4. Press PAUSE to interrupt tape play; press PAUSE again to continue.
5. Press STOP to stop play completely. (The tape automatically stops
when it gets to the end.)
E
P
RASE
ROTECTION
When you record new material, the cassette deck records over whatever is
on a tape. To protect a tape from accidental erasure, break off one or both
plastic tabs on the top of the cassette tape (one for each tape side). If you
decide later to record on the tape, seal the hole with a piece of cellophane
tape.
4
or
) until you get to the desired point on
A
TIP: Slack in your tapes can
cause scratches on the tape, or
A
worse yet, the tape could break.
If you notice some slack in the
tape, use a pencil to tighten it
up before you insert it.
Advertisement
Table of Contents
