1. Manuals
  2. Brands
  3. Jobsite Manuals
  4. Paint Sprayer
  5. CT1841
  6. Instruction manual

Jobsite CT1841 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ELECTRIC SPRAY GUN CT1841
INSTRUCTION MANUAL
Read the operating instructions carefully before using the tool and observe
the safety instructions. Keep the operating instructions in a safe place.
Cannon Tools Limited
Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM

Advertisement

Table of Contents
loading

Summary of Contents for Jobsite CT1841

  • Page 1 ELECTRIC SPRAY GUN CT1841 INSTRUCTION MANUAL Read the operating instructions carefully before using the tool and observe the safety instructions. Keep the operating instructions in a safe place. Cannon Tools Limited Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM...

  • Page 2: Ec Declaration Of Conformity

    In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description:ELECTRIC SPRAY GUN Model: CT1841 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Electromagnetic Compatibility 2014/30/EU...

  • Page 3: Specifications

    1. SPECIFICATIONS Model CT1841 Voltage 220-240V~ Frequency 50Hz Power 110W Max. Output 300ml/min Nozzles 0.8mm Container capacity 800ml Sound pressure level 91.4 dB( A); K : 3,0 dB(A) Sound power level 102.4 dB( A); K : 3,0 dB(A) Vibration emission 12.3 m/s...
  • Page 4 suitable distance from the tool user. Unplug and house all power tools that are not in use. A power tool should never be left unattended while connected to the power supply. They must be housed in a suitable location, away locked up and from children. Do not overload or misuse the tool.
  • Page 5 away from the machine. Prevent unintentional starting. Before plugging any machine in to the power supply, make sure the switch is in the OFF position. If the machine is portable; do not hold the machine near the switch and take care when putting the machine down;...

  • Page 6: Technical Description

    Double insulated : This product requires no earth connection as supplementary insulation is applied to the basic insulation to protect against electric shock in the event of failure of the basic insulation. Apart from replacing the fuse in the plug, no other electrical work is recommended on this machine.

  • Page 7: Unpacking And Checking

    4. UNPACKING & CHECKING Carefully remove the spray gun from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the contents out and check them . If any part is damaged or missing; please contact the seller and do not attempt to use the power tool.
  • Page 8 Most paints are supplied ready for brush application and will need to be thinned before they are suitable to be sprayed. Follow the manufacturer’s advice on thinning the paint when used with a spray gun. The viscosity cup will help you to determine the correct viscosity of paint to be used.
  • Page 9 Fig. 3 Never start or stop the spray gun while it is aimed at the surface to be sprayed. Evenly control the speed of movement of the spray gun. A fast speed of movement over the surface will give a thin coat and a slow speed will give a heavy coat.

  • Page 10: Maintenance

    keep the output control on a low setting. This will avoid using too much paint and prevent overspray. Where possible, avoid stopping and starting when spraying an object. This can lead to too much, or not enough paint being applied. 6.
  • Page 11 2. Remove paint container, pick up pipe and filter. 3. Take off the pump assembly. 4. Release the nozzle (H), valve (I), piston (M) and spring (L). 5. Clean the cylinder (K) and all parts thoroughly with solvent. 6. Apply a few drops of light lubricating oil to the piston, spring and cylinder. 7.

  • Page 12: Troubleshooting

    7. TROUBLESHOOTING Malfunction Cause Solution Motor noise not Spray gun not clean, or not Disassemble spray gun normal. lubricated, resulting in piston and clean with thinner. being stuck in cylinder Motor hums but 1. Worn swirl head 1. Replace swirl head. does not spray or 2.

  • Page 13: Disposal Guidelines

    8. DISPOSAL GUIDELINES At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. • Contact your local authority for details of collection schemes in your area. In all circumstances: •...

  • Page 14: Exploded View

    10. EXPLODED VIEW...
  • Page 15 Part no Description Part no Description Cord set Nozzle Sleeve Spanner Cord Fixing Rivet Screw Steel sheet Tigger Rivet Switch Bobbin Internal Wire Rubber Sheet Knob E steel sheet Shaft Rivet Rubber tip Core clip Base Leaf spring Spring Rivet grip Guard Enclosure A...
  • Page 16 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...

Table of Contents