Next NEWSTEAD WHT BED 862920 Assembly Instructions

King

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this lea et and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• WARNING: Do not use the bed if any part is broken, torn or missing and use only spare parts approved by the
manufacturer.

PRODUCT INFORMATION

• Made from metal with a powder coating nishing.
• Made in China.
• A mattress measuring 150cm x 200cm is intended for use with this bed.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the oor as this will cause damage to the joints.
• All assembly xings should always be tightened properly and periodically check all xings and tighten if necessary.
862920 NEWSTEAD WHT BED
ASSEMBLY INSTRUCTIONS.
Page 1 of 4
- KING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEWSTEAD WHT BED 862920 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next NEWSTEAD WHT BED 862920

  • Page 1 862920 NEWSTEAD WHT BED - KING ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS STEP ONE 1. Attach 4 x feets (6) to headboard (1) and footboard (2) with 4 x bolts (A) and use allen key (F) to tighten. 2. Attach 4 x form pads (12) to the bottom of each leg.
  • Page 3 STEP THREE 1. Attach 2 x support rails (5) to 1 x centre rail (4) with 4 x bolts (A) and 4 x washers (D) and use allen key (F) to tighten. 2. Attach 2 x support legs (7) to 1 x centre rail (4) with 2 x bolts (B) and 2 x washers (D) and use allen key (F) to tighten.
  • Page 4 Remove the mattress and lift the bed into its new position to avoid damaging the bed. Ensure the feet are at 90۫ to the floor before replacing the mattress. STEP EIGHT Next Retail Ltd, Desford Road, Leicester, LE19 4AT Page 4 of 4...

Table of Contents