Download Print this page

EDI EDV225MPC-3L-N1-VT-IR Quick Manual

Production scoreboard

ELECTRONIC DISPLAYS INC.

135 S. CHURCH STREET

ADDISON, ILL. 60101

www.electronicdisplays.com

EDV225MPC-3L-N1-VT-IR - Production Scoreboard

I. Brief Introduction

The production output display screen (hereinafter referred to as the display screen) displays the

target output, actual output, difference or achievement rate display value after power-on. Display

content can be adjusted by remote control. Actual output plus one photoelectric switch turn on

once, actual output value plus one counting step. Differential yield = actual yield - target yield.

Achievement rate = actual yield * target yield * 100%. Differential yield and achievement rate can

be switched and displayed. No loss of display content when power off.

II. Wiring instructions

5-core photoelectric switch for output counting of aerial head.

The three-core air head leads are connected to 485 communication terminals, including one foot

of red line 485.A, two foot of blue line 485.B, and three foot of black line 485.B. The communication

line adopts 3-core twisted-pair shielding wire. All Kanban communication lines are merged into 485

Table of Contents

Need help?

Do you have a question about the EDV225MPC-3L-N1-VT-IR and is the answer not in the manual?

Page 1 135 S. CHURCH STREET ADDISON, ILL. 60101 www.electronicdisplays.com EDV225MPC-3L-N1-VT-IR - Production Scoreboard I. Brief Introduction The production output display screen (hereinafter referred to as the display screen) displays the target output, actual output, difference or achievement rate display value after power-on. Display content can be adjusted by remote control.
Page 2 converter and connected to the computer USB port. The red line is connected to 485 converter'+'terminal, the blue line is connected to 485 converter'-' terminal, and the black line is connected to 485 converter'-'terminal. The 4-core aircraft head is connected with AC 100-230V voltage. 3.
Page 3 key in turn, press end key to exit setting. When set, the data is preceded by a prompt d, that is to say, "d = 01" indicates that the communication place is 1. 11. Switch display. The TABATA key can switch to display differential yield or achievement rate. Notes 1.