Page 1
DAWN HOUSE BED | OWNER'S MANUAL Customer Service: www.dawnhouseliving.com | 1-888-DAWNHSE (1-888-329-6473) Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.
SAFETY PRECAUTIONS AND USAGE STATEMENTS ATTENTION: IMPORTANT SAFETY DISCLAIMERS READ THE FOLLOWING INFORMATION BEFORE USING THIS PRODUCT. FAILURE TO USE A SURGE PROTECTION DEVICE COULD COMPROMISE SAFETY OR CAUSE PRODUCT MALFUNCTION AND COULD VOID THE ELECTRICAL PORTION OF YOUR WARRANTY. TO REDUCE THE RISK OF SHOCK, BURNS, FIRE OR head or foot to relieve pressure and allow for release.
Page 4
1 ½”. All Ergomotion adjustable foundations, depending on make and model, are designed and manufactured to perform and function within designated quality control parameters. Bases are subject to meticulous and rigorous inspections during woods, metals, plastics and fabrics.
Page 5
SAFETY PRECAUTIONS AND USAGE STATEMENTS BREAK IN PERIOD: You can speed up the break-in period by simply spending time in WEIGHT LIMITS: the adjustable bed through activities such as reading, watching TV or This product is not rated to support weights in excess of 750 pounds for playing with the kids or grandkids.
PARTS LIST BEFORE DISCARDING THE PACKING MATERIALS - ENSURE ALL THE PARTS ARE ACCOUNTED FOR. ALL ELECTRONICS AND COMPONENTS THAT NEED TO BE INSTALLED ARE LOCATED IN BOXES UNDER THE BASE OR ATTACHED TO THE FRAME. Wireless Remote Control & AAA Batteries (2) Mattress Retainer Bar* Legs Pads (4) Power Cord...
BASE OVERVIEW Underbed Motion Foot Bed Lift Lights Detector WiFi Motor Motor #1 Health Sensor Foot Massage Head Motors Massage Motors Head Motor Health Sensor Motion Control Bed Lift Detector Motor #2...
QUEEN SIZE ELECTRONIC OVERVIEW NOT TO SCALE. FOR ILLUSTRATION PURPOSES ONLY. READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Head Massage WiFi Health Motors Sensors Underbed Lights Foot Massage Remote Control Motors Motion detectors Emergency Battery Bed Lift Motor Extension Cord Backup Strap Power Supply Power Cord Control Box...
Page 9
TWIN LONG SIZE ELECTRONIC OVERVIEW NOT TO SCALE. FOR ILLUSTRATION PURPOSES ONLY. READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. WiFi Health Sensor Underbed Lights Foot Massage Remote Control Motor Motion detectors Sync Extension Emergency Battery Bed Lift Motor Cord Cable Backup Strap Power Supply Power Cord Control Box...
Page 10
FULL SIZE ELECTRONIC OVERVIEW NOT TO SCALE. FOR ILLUSTRATION PURPOSES ONLY. READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Head Massage WiFi Health Motor Sensor Underbed Lights Foot Massage Remote Control Motor Motion detectors Extension Emergency Battery Bed Lift Motor Cord Backup Strap Power Supply Power Cord Control Box...
INSTALLATION GUIDE ALWAYS USE TWO PEOPLE WHEN SETTING UP THE BASE. STEP 1 STEP 5 With the help of an able-bodied assistant, place the carton on the To install the mattress retainer bar, insert each end of the bar into the floor in its desired location with the bottom side facing up.
Page 12
INSTALLATION GUIDE (CONTINUED) STEP 7 STEP 11 (Optional: For Dawn House mattress orders only) Locate the input cord under the base and If you received the Dawn House mattress with your order, remove it from plug it into the power supply. its carton and and unroll the mattress.
DAWN HOUSE HEADBOARD INSTALLATION CONTINUE WITH THE STEPS BELOW TO INSTALL YOUR DAWN HOUSE HEADBOARD. STEP 1 STEP 5 With the help of an able-bodied assistant, place the headboard Secure the headboard to the base with included screws. (At least two carton on the floor in its desired location.
PLACING THE BED INTO YOUR OWN FURNITURE The Dawn House bed is slightly narrower than the standard bed frame size and can work with most existing bed frames. The Dawn House bed needs to rest directly on the floor. Do not place it on slats or box springs.
REMOTE CONTROL BUTTON FUNCTIONS A. Light: Turn the underbed lights On/Off. B. Motion Detector Switch: Motion activated underbed lighting: On(Up)/Off(Down) Note: Press the Flat button to confirm selection. C. Relax: Massage cycle (Low > Medium > High > Off) After 10 minutes, massage timer will automatically turn off. D.
PAIRING THE REMOTE CONTROL THE REMOTE THAT COMES IN THE BOX IS ALREADY PAIRED TO THE ADJUSTABLE BASE. NO FURTHER ACTION IS REQUIRED. IN THE EVENT THAT THE REMOTE IS NOT PAIRED WITH THE BASE, FOLLOW THE STEPS BELOW. STEP 1 STEP 2 Remove the battery cover on the back of the remote control.
THE PUCK VOICE ACTIVATED SYSTEM OVERVIEW PLEASE FAMILIARIZE YOURSELF WITH ALL SAFETY INFORMATION BEFORE SETTING UP THE PUCK VOICE ACTIVATED SYSTEM. OVERVIEW ATTENTION: Your adjustable base can pose an entrapment hazard which is increased in households with small children and or pets. Using voice controls further increases this entrapment hazard due to the potential of Puck Cable unintentionally triggering a command vocally.
THE PUCK VOICE ACTIVATED SYSTEM INSTALLATION FOLLOW THE INSTALLATION STEPS BELOW TO SET UP THE PUCK VOICE ACTIVATED SYSTEM. STEP 1 STEP 5 Please take a minute to familiarize yourself with the voice commands The Puck Voice Control will arrive in the listed on the page 17.
THE PUCK VOICE COMMANDS ONCE THE INVOCATION PHRASE HAS BEEN UTTERED, THE MICROPHONE WILL BE ACTIVE FOR 8 SECONDS WHICH IS INDICATED BY THE BLUE LIGHT. WHILE THE MICROPHONE IS ACTIVE YOU CAN NOW USE ANY OF THE COMMAND PHRASES LISTED BELOW TO CONTROL YOUR ADJUSTABLE BASE. VOICE COMMAND EXPLANATION VOICE COMMAND...
SYNCING TWO TWIN LONG BASES (OPTIONAL) A SYNC CORD IS INCLUDED WITH THE BASE. NOT AVAILABLE ON QUEEN OR FULL SIZE BASES. THE SYNC CORD CONNECTS THE TWO CONTROL BOXES TO SYNCHRONIZE THE MOVEMENT OF THE TWO BASES. USE THIS FOR A KING SIZE MATTRESS ON TWO ADJACENT TWIN LONG BASES. STEP 1 Raise the head of both bases, then unplug them from power source.
EMERGENCY BATTERY BACKUP STRAP FOR EMERGENCY USE ONLY, IN CASE OF A POWER OUTAGE. BATTERIES ARE NOT TO BE USED FOR NORMAL OPERATION OF THE BED. STEP 1 STEP 3 Manually lift the head section to access the power supply. Connect the end of the Battery Backup Strap to the input cord and Disconnect the Power Supply from the input cord that is connected then use the remote to return the base to a flat position.
TROUBLESHOOTING IF ONE OR MORE FUNCTIONS ON THE BED BASE HAVE STOPPED OPERATING: • Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. •...
Need help?
Do you have a question about the Dawn House Bed and is the answer not in the manual?
Questions and answers