Download Print this page

tbs electronics TBS6909 Quick Start Manual

Hide thumbs Also See for TBS6909:

Download this manual

quick guide for tbs6909

Dear Customer,

Thanks for using TBS6909, TBS6909 is a powerful DVB-S/S2 octa tuner card, and there is some

information you need to know before using.

There are three ways of signal input for TBS6909, which are shown as the picture below:

www.tbsdtv.com

Page 1 Dear Customer, Thanks for using TBS6909, TBS6909 is a powerful DVB-S/S2 octa tuner card, and there is some information you need to know before using. There are three ways of signal input for TBS6909, which are shown as the picture below:...
Page 2 Mode 2: If you are using quad LNB, you can directly connect the 4 cables to the 4 ports of TBS6909. Mode 3: If you are using C band or Ku band single, then two inputs are enough, you just need to connect the cables to input 0 and input 2.
Page 3 Set the “Delivery System” to DVBS2 and Modulation. If you want to use DiSEqC with TBS6909, you need to change the mode to normal mode, one input for two tuners, two tuner use the same satellite, you can do it like this: Create text file "/etc/modprobe.d/tbs.conf"...
Page 4 After creating this file, please restart your PC to load the new configuration. Any more question please send email to our support at support@tbsdtv.com . Best Regards, TBS Support Team Email: support@tbsdtv.com Website: www.tbsdtv.com www.tbsdtv.com...