GE 234D1050P001 Owner's Manual page 26

Before you call for service...
PROBLEM
Small amount of water
on floor in front of dryer
Water on floor in back
of dryer
Water drips from door
when opened after
a Steam Cycle
Cannot see steam at
beginning of cycle
Cannot see steam at any
time during the cycle
Garments still wrinkled
after steam cycle
Dryer continues to
tumble after display
says Complete
26
Possible Causes
Inadequate load size for steam
cycle selected, excess steam
condenses inside cabinet and
leaks out
Loose water hose connection to
valve
Hose missing rubber washer at
connection with valve
Steam condenses on inner door
Steam released at different
time in cycle
The steam nozzle might be
clogged with debris from your
water supply
Too many garments
Extended Tumble was selected
What To Do
• If using the STEAM DEWRINKLE cycle, manually reduce cycle
time . If using the STEAM REFRESH cycle, add more garments
to the load .
• Tighten connection.
• Install rubber washer provided with hose.
• This is normal.
• This is normal.
• Call 800.GE.CARES to order nozzle replacement kit WE25M71
or to request a service technician to replace this for you.
• Load fewer garments; manually increase time.
• Ensure EXTENDED TUMBLE option is not selected . For the STEAM
REFRESH cycle, EXTENDED TUMBLE will automatically be turned
on and cannot be turned off .