Advertisement

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.
Caution
Please consult the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.
Before Installation
Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory. 
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation, 
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
USER MANUAL
Rainfall Thermostatic Shower System
SKU:H200166
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H200166 and is the answer not in the manual?

Questions and answers

Summary of Contents for hernest H200166

  • Page 1 SKU:H200166 USER MANUAL Rainfall Thermostatic Shower System Thank you for shopping with Hernest, please read this user manual thoroughly for your full under- standing, installing, and application of the product. Please have this user manual well-reserved for future reference. Caution Please consult the professionals before installation or repairing.
  • Page 2 Installation Instruction Technical parameters of thermostatic mixer: Ideal work pressure:0.1MPa~0.5MPa Cold water inlet temperature:4℃~29℃,Hot water inlet temperature:55℃~85℃ Safety setting button:38℃ Application standard :ASME A112.18.1-2005/CSA B125.1-05、EN1111 and QB2806-2017 Part List ⑦ ⑥ ⑤ Description ⑧ Main body ③ ④ Accessories Straight pipe Shower hose ②...
  • Page 3 Installation Steps 900~1000mm(35.4"~39.4") Prepare and install the water inlets, Install the fixed holder according to actual suggested center distance of hot and dimensions. cold water inlet pipe: 59"(150mm) Assemble and connect the parts in the Test the product when finishing the sequence above.
  • Page 4 Usage Instruction This product is the right hand wheel to control the temperature, the left hand wheel to switch the modes and change water flow. The right hand wheel scale is aligned at (38±1) ℃ (see the above picture). Rotate clockwise to increase the temperature;...
  • Page 5 If you have any issues with the product, please feel free to contact us online or by phone for customer service. Phone No.: (909) 430-1666 Service E-mail: service@hernest.com For more detail information, please check out www.hernest.com It will be our pleasure to have your visit. www.hernest.com...

Table of Contents