Fcc-Id Warning; Change Log - Navatics MITO Quick Start Manual

the following maintenance procedures:
1) After diving, especially in salt water, please
rinse Navatics MITO with fresh water. This
will help prevent salt cumulation and
corossion (especially in connectors)
2) Dry the connector, ensure that no water is
in the connector pins before storing.
3) Ensure that the connector is tightly
connected, and the O-Ring is present
around the head of male connector. This
will ensure the longevity of the connector
pins. Failure to ensure and maintain the O-
Ring condition may result in corrosion in
connector's pins
7.

FCC-ID Warning

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
interference to
Consult the dealer or an experienced radio/TV
technician for help.
8. Changelog
Version 1.0
 Initial submission
Version 1.1
 Added New Features Manual
 Added New Remote Manual
Version 1.2
 Added dive logs images
 Added LED indicator explainations
 Fixed calibration steps
Version 1.3
 Added charging sectoin
 Added media retrieval section
 Updated camera settings section
 Added starting up roller and remote section
 Added account registration and binding section
Version 1.4
 Added maintenance
 Fixed typography
 Added motor status indicator
Version 1.5
 Added FCC-ID Warning
 Split into two columns
 Format tuning
radio
th
Henry Liyanto 8 Feb 2018
nd
Henry Liyanto 22 Nov 2018
Th
Henry Liyanto 8 Dec 2018
Th
Henry Liyanto 11
Th
Henry Liyanto 11
Th
Chang Zhao 27
Dec 2018
Dec 2018
Feb 2019