Page 1: Table Of Contents
Owner’s Manual “UVC-02 Setup Tool” computer app Use the “UVC-02 Setup Tool” app for computers to configure the various settings of the UVC-02, as well as to back up the settings of the UVC-02 to a computer connected via USB.
Page 2: Panel Descriptions
[VIDEO OUT] button that connects to the UVC-02, this button shows or When this button is lit, the video signal is output. hides UVC-02 Setup Tool. [SETUP] button * You can use UVC-02 Setup Tool to configure the various settings.
Page 3: Rear Panel
* This unit does not support interlace formats such as 1080i or 720i. to the USB 3.0 port on your computer. * If you connect via an extension cable or a USB hub, the computer might not recognize the UVC-02. We [PHANTOM +48V] switch recommend that you connect the UVC-02 directly to your computer.
Page 4: Setup Examples
Setup Examples Private Web Meetings You can use a high-quality camera and mic with this unit to smoothly hold Web meetings with excellent image quality and sound. Digital camera HDMI Computer Internet Professional Video Streaming By connecting a V-1HD or other video switcher to this unit, you can use multiple cameras to send a full-fledged video feed to your computer. HDMI V-1HD Video camera...
Page 5: Web Presentations
Setup Examples Web Presentations You can use this unit to input and stream the video from a presentation or other documents shown by a presenter, even where the presenter is using a different computer from the computer doing the streaming. Monitor/display Computer (used for presentation)
Page 6: Basic Operation
Basic Operation Turning the Power On/Off Adjusting the Input Levels The UVC-02 operates using bus power from the USB port of your Adjust the input levels according to the devices that are connected. computer. * Before turning the unit on/off, always be sure to turn the volume Use the [HDMI] knob to adjust the input level of the down.
Page 7: Configuring The Settings (Uvc-02 Setup Tool)
Goes back one slide on your SLIDESHOW PREV. computer. This specifies the function assigned to the [A2] button. 5 You can also press the [SETUP] button on the UVC-02 to close or Lets you adjust the reverb size open the screen. REVERB and level.
Page 8: Setting The Functions For The [Talk] Button
Configuring the Settings (UVC-02 Setup Tool) Setting the Functions for the [TALK] Button Configuring the Audio Click the [ BUTTON] tab to switch the page. Click the [AUDIO] tab to switch the page. Value (bold text: Menu Explanation Value (bold text:...
Page 9: Configuring The Effects
The effect you set here is applied to the respective audio signals EXPANDER when the [EFFECT] button on the UVC-02 is lit. Reduces the level of sounds even further that are quieter than the Also refer to the block diagram (p. 14) for details, such as the specified level.
Page 10: System Settings
1–5–10 volume changes uniform in size. You can save the settings of the UVC-02 to a file, and save this on your Larger values make the volume computer. The settings in the file you saved can be recalled if needed change smoothly.
Page 11: Returning To The Factory Settings (Factory Reset)
(Factory Reset) Use the Setup Tool to update the system program of the UVC-02. Here’s how you can return the settings of the UVC-02 to their factory- Checking the version number set state. If the unit does not operate as described even though you’ve followed the steps in the manual, try executing a factory reset.
Page 12 The power to the UVC-02 is turned off. Reconnect the USB cable after a while (about five seconds). The UVC-02 restarts, and a screen like the one below appears in the Setup Tool. To revert to the previous settings before updating, click “YES”;...
Page 13: Appendix
Appendix Troubleshooting If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby Roland Service Center. Problem Items to check Action Page Video-related problems The UVC-02 does not support copy-protected –...
Page 14: Block Diagram
Appendix Block Diagram UVC-02 Audio Block Diagram LEVEL ECHO METER [TALK] CANCEL BUTTON Analog [MIC] NOISE EXPAND COMP. [EFFECT] GAIN VOLUME ESSER SUPP. VOICE BUTTON CHANGE [EFFECT] [MONITOR] [EFFECT] ANTI- BUTTON [A1] VOLUME PHATOM +48V BUTTON FEEDBACK BUTTON MONITOR LEVEL...
Page 15: Main Specifications
Leaflet “Read Me First, ” USB 3.0 cable * 0 dBu = 0.775 Vrms * This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.

Roland UVC-02 Owner's Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roland UVC-02

Table of Contents