Download Print this page

Solaire 5000 Series Instructions

For stanley innerspace products

Lock instructions for

Stanley InnerSpace products

purchased before October 1, 2018

5000 Series Electronic Locks

For additional assistance contact:

888 435 2256 - phone

616 743 5944 - fax

solairemedical.com

Solaire Medical

888-435-2256 phone

® InnerSpace is a registered trademark of Solaire Medical, Grand Rapids, MI 49501

Lock I nst ruct i ons

Storage Solutions for Healthcare

Solaire Medical

P.O. Box 2808

Grand Rapids, Michigan 49501

616-743-5944 fax

solairemedical.com

1118

Table of Contents

Need help?

Do you have a question about the 5000 Series and is the answer not in the manual?

Page 1 616 743 5944 - fax solairemedical.com Solaire Medical P.O. Box 2808 Grand Rapids, Michigan 49501 888-435-2256 phone 616-743-5944 fax solairemedical.com © 2018 Solaire Medical, Grand Rapids, MI 49501 ® InnerSpace is a registered trademark of Solaire Medical, Grand Rapids, MI 49501 1118...
Page 2 5000DKE Lock Instructions ATTENTION IMPORTANT LOCK INFORMATION Start-Up Instructions for 5000DKE locks Opening and programming a new cabinet lock: 1. All 5000DKE electronic locks are pre-set with the following code: 1-2-3-4-# This code was pre-set using step #1 of the Quick Programming Guide (a copy is placed in a sealed envelope on the back of each cabinet) that is included with the lock.
Page 3 Performing a factory reset: In the event the pre-set lock code is unknown or non-functioning, you can perform a factory reset and program your own unique supervisor code by following the steps below: 1. Locate the green serial number tags/labels provided in the sealed envelope on the back of the newly received cabinet.
Page 4 6. Be sure to record this number and keep in a secure location in the event it is needed at a later time. This number is now this individual cabinet’s valid Supervisor Access Code that allows all cabinet access, addition and deletion of users to the cabinet. Important! Save this information.

5000dke