Table of Contents
Advertisement
MAINTENANCE
Cleaning The Drain Pump Filter
Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the washing
• Clean the filter periodically to ensure the normal operation of washing machine.
Open the lower cover cap
Open the filter by turning to
the counter clockwise
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly,
cap plates should be inserted aligning to hole plates otherwise water may
leak.
• Some machines don't have emergency drain hose, so step 2 and step 3 can
be skipped. Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the program selected there
can be hot water in the pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the cycle, and is empty.
When replacing the cover, ensure it is securely re-tightened.
Rotate 90' and pull out the
emergency drain hose, and
take off the hose cap.
Remove extraneous matter
After water runs out, reset
the drain hose.
Close the lower cover cap
Advertisement
Table of Contents
