Page 1
ASSEMBLY & PRODUCT CARE COCKTAIL CABINET 5059413329654 IMPORTANT: ONLY ATTEMPT TO MOVE AND ASSEMBLE THIS PRODUCT WHEN EMPTY DO NOT ATTEMPT TO LIFT ANY LOAD IF IT IS DIFFICULT TO DO SO THE MAXIMUM LOAD CAPACITY OF EACH DOOR IS 20KG EACH Thank you for purchasing this PRODUCT.
Page 2
Fittings and parts checklist Image Part Description Base Fixing Description Image Allen Bolt M5x50mm Allen Bolt M5x20mm Wall Bracket 5mm Allen Key...
Page 3
Step by step assembly instructions Step 1 Fix Top (1) to Base frame (2) with Bolts (A) using Allen Key (D) provided. IMPORTANT: PLEASE NOTE WHEN LIFTING OR MOVING PRODUCT ALWAYS DO SO FROM THE UNDER FRAME IMPORTANT: SECURE YOUR FURNITURE TO THE WALL USING THE ANTI-TOPPLE KIT PROVIDED FOLLOWING THE BELOW INSTRUCTION.
Step 3 Adjust the length of Wall Brackets (B) to meet the wall then tighten with Bolt (C) using Allen Key (D). Mark on wall with a pencil the location to make holes. Now fix the product to the wall using suitable wall fixings for your wall type.
IMPORTANT: If an Anti-topple device is included with this unit, you must install it in accordance with the instructions provided using fixings suitable for the wall type. If unsure, please seek advice of a professional. Care and Maintenance WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU WITH YEARS OF ENJOYMENT IN YOUR HOME.
Page 6
How to care for Leather Always use reputable leather cleaning products and follow the manufacturer’s recommended instructions. Regular wiping with a damp, soft cloth is often enough to keep a leather looking pristine. Keeping leather at least 50cm from a heat source will avoid the leather cracking. Spilt liquid should be blotted immediately with a dry cloth or kitchen paper until it is dry, do not rub the area as this could cause discoloration damaging the finish.