XBOX OneGuide Quick Start Manual

Xbox OneGuide with Nex-Tech
Jason Englert Fri, Nov 29, 2013
How to use Xbox OneGuide with Nex-Tech
The purpose of this guide is to walk through the setup of Xbox One Guide which is a feature one the
Xbox One. This will integrate with your current STB provided by Nex-Tech. In order for this guide to
work, you will need to have your Xbox One connected to your Amino or ADB box. You can see the
picture below if you need assistance with this, or visit
After your STB is hooked up to your Xbox One. You will go into
OneGuide. Once you select that you will see a start up screen. This screen will appear
like this.
Once on this screen you will select Start, and the Xbox will begin the setup process. The
next screen will tell you if a box has been detected, you will either have the option to
continue, or you will receive an error asking to check the cables going between your Xbox
and STB. Once the Xbox has detected your STB, it will begin the "Xbox On" Setup. This
feature will allow you to turn on the TV when you say "Xbox On". You can either set this
up or skip this feature. This feature will not affect your Xbox OneGuide feature.
Gaming Consoles 9835
your Settings menu, and then select TV &
Xbox Support.