When the Blanket is folded, crumpled or used abnormally the Blanket can overheat which will activate the permanent protection function. This cannot be repaired at home and should be returned. Please email us: info@bielay.com. • If the power voltage is lower than recommend, the temperature of the Blanket rises slowly.
Warnings To prevent damage or malfunction, please observe the following while using the Electric Blanket. Failing to do so will void our guarantee: Do not use folded or rucked. (Fig.1). Never turn the Blanket on • while folded or creased. Ensure the Blanket is flat when in use.
Page 5
Warnings Do not use together with any other heating appliances (such as foot • warmer, hot-water bottle). (Fig.8) • Do not use with anything that can start a fire on the bed such as cigarettes, sparks etc, which can lead to fire. (Fig.9) Switch off the Blanket power supply when not in use.
Page 6
Warnings • Please dispose of in the correct manner and separately from domestic waste. • Do not unplug the power plug by pulling on the power cord and do not move the Blanket by pulling on the power cord. Only operate and control using the switch unit or controller. •...
Page 7
Warnings Do not insert pins. • • If the heating wire has been cut, do not attempt to repair it by yourself. Please contact us and we can help. • For all night, and or prolonged use, please set the switch button to “1”...
Cleaning and Maintenance Please note the Bielay Electric Blanket can be washed but NEVER DRY CLEANED. • HAND WASH OR MACHINE WASH (40 degrees) • BEFORE WASHING DISCONNECT THE PLUG FROM THE MAINS POWER SUPPLY. • Ensure the Blanket is at room temperature before cleaning.
Page 9
Cleaning and Maintenance Drying • Never wring the Blanket • Please re-shape the Blanket prior to drying. • Air dry on clothes line. DO NOT peg on the wired area of the blanket as it will damage the circuit. Please ensure the Blanket is completely dry before use. •...
Fitting Instructions 1.Use the cord at point 1A underneath the mattress to point 1B, to tighten and tie a secure knot. 2.Use the cord at point 2A underneath the mattress to point 2B, to tighten and tie a secure knot. 3.Ensure that your Blanket is positioned correctly as above.
Using Your Blanket Once the Blanket has been fitted to the bed correctly and the power source has been connected, plug the power lead into the closest socket at the pillow end, using an extension lead if needed to ensure that the lead is not stretched.
Page 12
Using Your Blanket Time it takes • The blanket will start to heat after a few minutes provided it is covered correctly with a duvet or blanket (this will depend on room temperature and the type of bedding used). If using the blanket all night long or for extended period, •...
If the Blanket is still faulty and you have proof that the Blanket was purchased within the last 3 years, please contact the Customer Services Team. Email us at: info@bielay.com To validate your guarantee please register your Bielay Electric Blanket by emailing us the purchase date and invoice details e.g screen shot of...
This guarantee is only valid if the appliance has been used for domestic use only in accordance with the instructions provided. All Bielay products are individually tested before leaving the factory. If the fault develops within 30 days of purchase, please return to the place of purchase for a replacement.
Page 15
Your Guarantee Exclusions: Bielay shall not be liable to replace or repair the goods under the terms of the guarantee in the following cases: • Fault caused through accidental use, misuse, negligence or used contrary to the manufacturer’s recommendations and care instructions.
Need help?
Do you have a question about the warmness and is the answer not in the manual?
Questions and answers