Page 1
User Manual Mytee Hot Turbo Models: 240-120, 480-120 REV. 1/26/22 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 www.mytee.com...
Page 2
Introduction Dear Customer: Congratulations on the purchase of your new Mytee Hot Turbo External Heater. As tech- nology continues to develop you can work confidently knowing that both Mytee and its employees are equally dedicated to developing with the industry and its advances.
Important Safety Information At a Glance 1.1 - Technical Specifications 1.2 - Product Features Machine Operation 2.1 - Powering the Mytee Hot Turbo 2.2 - Connecting to Extractor/Truckmount 2.3 - Operation Machine Maintenance 3.1 - Opening the Machine for Maintenance...
When and if calling This machine must be grounded. If it should malfunction or break Mytee for support, please have your Model and Serial Number down, grounding provides a path of least resistance for electrical available for faster assistance.
Page 5
Important Safety Information To reduce the risk of fire, electrical shock, or injury: 17. The voltage and frequency indicated on the name plate must correspond to the wall receptacle supply voltage. 1. Read all instructions before using equipment. 18. When cleaning and servicing the machine, local or national 2.
1 - At a Glance 1.1 - Technical Specifications 240-120 Mytee Hot Turbo 480-120 Mytee Hot Twin Turbo Max. Pressure 1,500 PSI Max. Pressure 1,500 PSI Max. Max. 210º F 210º F Temperature Temperature Max. Wattage 2,400 W (4x 600 W) Max.
2. Once pump is primed and there is pressure in the solution line, turn on however many heaters on the Mytee Hot Turbo you are using and wait a few minutes for water to heat up.
2. Connect the Mytee Hot Turbo to the extractor and connect a cleaning tool to the Mytee Hot Turbo. 3. Turn on the extractor’s pump and run the System Maintainer solution through the Mytee Hot Turbo and into a bucket or receptacle until you have a solid stream.