Exception Settings - Paramount Fitness PAR 2MP LPR Series User Manual

Network Camera User Manual

At any time of day or night, please make sure the image of the camera is clear and with
adequate and even light, avoiding overexposure or too much darkness on both sides.

4.5.1 Exception Settings

This function can detect changes in the surveillance environment affected by the external
factors.
To set exception detection:
Go to ConfigEventException interface as shown below.
1. Enable the applicable detection that's desired.
Scene Change Detection: Alarms will be triggered if the scene of the monitor video has
changed.
Video Blur Detection: Alarms will be triggered if the video becomes blurry.
Enable Video Color Cast Detection: Alarms will be triggered if the video becomes
obscured.
2. Set the alarm holding time and alarm trigger options. The setup steps are the same as
motion detection. Please refer to motion detection chapter for details.
3. Click "Save" button to save the settings.
4. Set the sensitivity of the exception detection. Click "Sensitivity" tab to go to the interface
as shown below.
27