This connector is for the additional USB 3.0 ports, and complies with the USB 3.0
cable is available from your system chassis, with this USB 3.0 connector, you can have
a front panel USB 3.0 solution.
Due to Intel
Windows
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
1-44
®
limitations, USB3_34 connector ports run at USB 3.0 speed rate under
®
7 or later versions.
Chapter 1: Product introduction