Summary of Contents for Love N Care Revolution
- Page 1 Instruction Manual “Revolution” High Chair IMPORTANT : PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. Item BP 900...
-
Page 2: Important: Keep For Future Reference
WARNING IMPORTANT: KEEP FOR FUTURE REFERENCE Read all instructions before assembly and use of product. Make sure high chair is fully assembled and secure before use. Failure to follow these warnings, cautions and the assembly instructions could result in serious injury or death. WARNING: PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. - Page 3 Parts list / Seat Back x1 Hinge Rod x1 Main Tray x1 Bolt M6 x5 Dishwasher saft Tray x1 Base x1 Vertical Leg x1 Seat Base x1 Harness x1 Seat Cover x1 Seat Cover x1 Seat Cover x1 Tool Needed: 1.
- Page 4 Slot ATTACH VERTICAL LEG TO BASE Push vertical leg into the hole of base. Ensure the slot and buckle are aligned before inserting. You will hear a “click” when they are secured into place. Buckle...
-
Page 5: Attaching The Seat
ATTACHING THE SEAT Raise tube to highest position by stepping the air control button. Place the seat onto the vertical leg as shown. Ensure the chair is aligned as in the illustration for correct asse- mbly. Secure the seat with 5 x M6 bolts with a screw driver. - Page 6 ATTACHING SEAT BACK 1. Insert the seat back into the seat base. Ensure the recline bar is properly inserted in the hole, see diagram A. 2. Ensure the hooks securely locks to the seat base, see diagram B. 3. Insert the hinge rod into the seat back securely through the side of seat base, see diagram C.
- Page 7 TO RECLINE THE SEAT To operate, squeeze the recline handle and move the seat until it locks into one of the three positions. WARNING: Before placing the child into the seat, make sure it is properly secured. WARNING: Make sure the metal clip is locked into position as shown before use.
- Page 8 DELUXE SEAT PAD MODELS ONLY ATTACHING AND USING THE HARNESS 1. Place the seat cover onto the seat unit, see diagram. lower harness buckles ( A . B ) through the seat cover. Then, feed the buckles through the slot at the front of the seat, see diagram.
-
Page 9: Attaching The Seat Cover
ATTACHING THE SEAT COVER Place seat cover over the seat and pull down into position. place seat cover over the crotch post as shown. - Page 10 SIMPLE SEAT PAD MODELS ONLY ATTACHING AND USING THE HARNESS harness buckles ( A . B )through the seat cover. Then, feed the buckles through the slot at the front of the seat, see diagram. Rotate so the buckles cannot come back through the slots. 2.
- Page 11 ATTACHING AND USING THE HARNESS The buckle clips together as shown and are released by pressing ( A & B ) simul- taneously. The harness can be adjusted by buckles ( C , D & E ) to suit your child. ATTACHING THE DISHWASHER SAFE TRAY The dishwasher safe tray can be...
- Page 12 ATTACHING THE TRAY Attach the tray by sliding it down the tracks on the arm of the chair, pull out the handles simultaneously and lock it into one of the three positions ( 1, 2 & 3 ) to best suit your child.
-
Page 13: Adjusting The Seat Height
ADJUSTING THE SEAT HEIGHT 1. To raise the seat height: step on the air control button. The chair will raise to its maximum position. 2. To lower the seat height: While pushing the air control button, push down on the seat unit. - Page 14 SEAT ORIENTATION The seat unit can rotate 6 positions. Twist the seat unit to the required position until it clicks into place. Care & Maintenance • DO NOT use spray lubricants, simply wipe clean after use.
- Page 15 Contact Us: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Fax: 02 9774 4633 Email: info@lovencare.com.au Website: www.lovencare.com.au...