Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Love N Care BP 9771
Summary of Contents for Love N Care BP 9771
-
Page 2: Care And Maintenance
Safety guidelines and instructions must always be followed before making use of this product, please retain these instructions for future reference. This product complies with product standard AS/NZS 2088:2000 & EN 1888 • Do not carry extra children or bags on this stroller. •... -
Page 3: Step 2: Attach Front Wheels
Assembly Instructions Step 1: Open the Frame Take the stroller out of the box and remove all the items. Unclip the safety locking clip on the side of the chassis (point 1) Place the frame on the floor, and pull the handle upwards (point 2) the frame should spring open and lock into place. -
Page 4: Step 5: Attaching The Hood
Step 5: Attaching the hood Clip the hood on the side of the frame as shown (point 1) Ensure that it is locked into place Step 6: Attaching the rear toddler seat (optional) Take the toddler seat and place the open end into the 1st holder (point 1) then you should push the toddler seat down so the rear wrench snaps into the second holder... - Page 5 Step 8: Using the front wheels in swivel Mode. To Unlock the front wheels and use them in swivel mode push the button up as illustrated in g 8. To lock the wheels so it can only go in one direction Push the button on the front of the frame down as shown in g 9.
-
Page 6: Step 12: Adjusting The Backrest Position
Step 11: To remove the rear wheels. Pull the release trigger as shown in Point 1. The wheel will then be released. Step 12: Adjusting the Backrest Position To have the stroller in the fully reclined pull down on the release strap as shown at point 1. - Page 7 Step 15. Using the hood. The hood can be made higher or lower depending on your suitability. Simply unclip the hood bracket from its position and replace in either the upper or lower position as required (Fig 17) Step 16: How to use the 5 Point Harness Carefully place the child in the seat and bring the safety harness around the childs waist and over the shoulders.
- Page 8 Step 16: Releasing Parts (A visual View) Step 17: Releasing rear toddler Seat To remove the rear toddler seat pull down on the lever switch as shown on point 6 (on both sides) pull the toddler seat up as shown in point 6 then lift as shown in point 8.
- Page 9 Step 18: Attaching/removing the front toddler seat Take the toddler seat and place the open end into the 1st holder (point 9) then you should push the toddler seat down so the rear wrench snaps into the second holder (pont 10). ENSURE this is done on both sides and make sure it is secure before placing a toddler on it.
-
Page 10: Step 19: Folding The Stroller
Step 19: Folding the stroller Remove all toddler seats if attached. In order to close the stroller close the hood as shown at point 1, pull the trigger up as shown at point 2 then pull the button point 3 on both sides of the frame at the same time, then push the handle down as shown at point 4. - Page 11 Contact Us: Love N Care Pty Ltd. 297-299 Canterbury Rd, Revesby NSW 2212 Australia Contact No: 02 9774 4655 Fax: 02 9774 4633 Email: info@lovencare.com.au Website: www.lovencare.com.au...