Ensure Safety Before Rising From Or Leaving Operator's Seat; Fasten Your Seat Belt - Hitachi ZAXIS 850-3 Workshop Manual

ENSURE SAFETY BEFORE RISING FROM
OR LEAVING OPERATOR'S SEAT
•
Before rising from the operator's seat to open/close
either side window or to adjust the seat position, be
sure to first lower the front attachment to the ground
and then move the pilot control shut-off lever to the
LOCK position. Failure to do so may allow the ma-
chine to unexpectedly move when a body part un-
intentionally comes in contact with a control lever,
possibly resulting in serious personal injury or death.
•
Before leaving the machine, be sure to first lower
the front attachment to the ground and then move
the pilot control shut-off lever to the LOCK posi-
tion. Turn the key switch OFF to stop the engine.
•
Before leaving the machine, close all windows,
doors, and access covers and lock them up.

FASTEN YOUR SEAT BELT

•
If the machine should overturn, the operator may
become injured and/or thrown from the cab. Addi-
tionally the operator may be crushed by the over-
turning machine, resulting in serious injury or death.
•
Prior to operating the machine, thoroughly ex-
amine webbing, buckle and attaching hardware. If
any item is damaged or worn, replace the seat
belt or component before operating the machine.
•
Be sure to remain seated with the seat belt se-
curely fastened at all times when the machine is
in operation to minimize the chance of injury from
an accident.
・We recommend that the seat belt be replaced
every three years regardless of its apparent con-
dition.
SAFETY
010-E01A-0237
SA-7
SA-237