Advertisement
Follow the original build flow to continue the setup and save the
configuration for the firmware building process.
After the building process is complete, you can find the kernel packages
under bin/ramips/packages/base/ (if the package you built is not there, you
can also use find command to locate where it is)
After the building process is complete, you can find the kernel packages
under bin/ramips/packages/base/ (if the package you built is not there, you
can also use find command to locate where it is).
Copy all related kernel module packages to a USB drive.
Plug the USB drive to AI7688H and perform the opkg install command to
install all necessary kernel packages from the USB drive.
root@mylinkit:/tmp/run/mountd/sda1# opkg install kmod*.ipk
Installing kmod-crypto-core (3.18.23-1) to root...
Installing kmod-crypto-hash (3.18.23-1) to root...
Installing kmod-fs-ext4 (3.18.23-1) to root...
Installing kmod-lib-crc16 (3.18.23-1) to root..
Package kmod-lib-crc16 (3.18.23-1) installed in root is up to date.
Configuring kmod-crypto-core.
Configuring kmod-crypto-hash.
Configuring kmod-lib-crc16.
Configuring kmod-fs-ext4.
Note: if you simply install the kmod-fs-ext4, an error will occur like below.
root@mylinkit:/tmp/run/mountd/sda1# opkg install
kmod-fs-ext4_3.18.23-1_ramips_24kec.ipk
Installing kmod-fs-ext4 (3.18.23-1) to root...
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for
kmod-fs-ext4:
* kmod-lib-crc16 * kmod-crypto-hash *
* opkg_install_cmd: Cannot install package kmod-fs-ext4.
From these information, we can know what additional kernel packages are
also needed for kmod-fs-ext4 under bin/ramips/packages/base/
-15-
Document Name
AI7688H
Reference Manual
Version
V 2.0
Date
2019/08/08
Advertisement
