Page 1 EXTRACTION UNIT ALL HOODS EXCEPT HI8 AND HI-HEPA Dear Customer, You have just purchased a FTM Technologies product. We thank you for your confidence. Please read this manual carefully before using your equipment. 1. Products covered by the leaflet 2. Technical description of the products 3.
Page 2 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment 1. PRODUCTS COVERED BY THE LEAFLET Visor hood REF HI1P Built-in hood REF HI2P Suitcase hood REF HI3P Multioperator hood* REF HI4P Fume cabinet...
Page 3 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment The use of the hood without rejection to the outside is possible in certain specific cases where: - The nature and concentration of the pollutants are well controlled - Continuous verification of the capacity of the filtering element is ensured The filter, mounted in a metal box, adapts to all hood models and has the following characteristics: Reference...
Page 4 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment 4. INSTALLATION / MOUNTING OF EQUIPMENT - Put the hood on a flat and horizontal surface to prevent it from tipping over. - In the event of an external discharge: Fix the discharge pipe in such a way as not to introduce any stresses that are detrimental to stability.
Page 5 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment Installing the pre-filter on the main filter This pre-filter is intended to protect the activated carbon filter from any clogging. - Position the pre-filter on the main filter. Make sure that the longer side of the pre-filter is placed horizontally to facilitate pinching of the latter from the front.
Page 6 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment - During a long shutdown, disconnect the power supply. 7. CARE AND MAINTENANCE WARNING: BEFORE ANY OPERATION REMOVE THE ELECTRICAL CORD FROM THE POWER SUPPLY. Extraction Unit : - The cleaning of the case is done with soapy water.
Page 7 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment 8. WARRANTY All units are warranted for 1 year parts and labor provided that you have used the product in accordance with its purpose and the instructions in the user manual.
Page 8 Fume hoods Soldering - Desoldering Specialized tools for wiring and tinning Hand tools, consumables and workshop equipment Our Company Our know-how has been with you for more than 100 years. We serve more than a thousand companies every year in all sectors and allow them to have work tools adapted to their activity.

This manual is also suitable for:

Hi2pHi3pHi4pHi5vpHi5vppHi5vpc ... Show all

FTM Technologies HI1P User Manual

Quick Links

1. Products covered by the leaflet

Need help?

Questions and answers

Related Manuals for FTM Technologies HI1P

Summary of Contents for FTM Technologies HI1P

This manual is also suitable for:

Table of Contents