1. Make necessary plumbing with reference to the installation diagram. (Fig.1) Back 2. GLEN recommends to use Stainless Steel (SS) Flexible Hoses having a minimum Jacket pressure rating of 8 Bar and hoses should be compatible for hot water applications.
4. Connect the hot water pipe to the outlet (Red Cap). Draining 5. Attach the discharge tube to safety valve as shown in installation diagram. (Fig.1) It is recommended that the tank be drained and flushed out every 6-9 months to remove sediment which may build up during operation.
Control Panel Operations Directions for use Fig.2 Caution: Before using the water heater, make sure that it should be completely filled with water. Indicator glows when the The wireless remote works with one CR 2025/3V CELL. “heating” is progress. Indicator glows when Ensure that the wireless remote does not get in direct contact with water.
Troubleshooting Problem Possible Cause(s) Solution Heater is not plugged in Plug in the heater No power supply in power Check the power socket socket on the wall Heating element(s) Call Customer Care Center No hot water breakdown or internal wiring error Cut out trip Reset cut out Inlet Valve closed...
Warranty This GLEN Electric Water Heater is fully warranted against any defect arising out of defective materials or faulty workmanship for a period of two year from the date of purchase. Should any defect develop in this product, the customer should bring the product to the nearest authorised service centre, where the company undertakes to get the product repaired free of charge.
Need help?
Do you have a question about the WH 7055 DIGITAL and is the answer not in the manual?
Questions and answers