Download Print this page

Nexa NE-510 Quick Start Manual

Hide thumbs Also See for NE-510:

Table of Contents

Need help?

Do you have a question about the NE-510 and is the answer not in the manual?

Page 2 Set Time Press mode button Arrow down to PGM Mode Press CASH button Arrow down to 15.Set Time and press No sale Enter 15 and press No sale Enter time in 24 hr format HH:MM eg 4:30pm = 16:30 Press the CASH button Press No Sale to exit Press Mode button Select REG and press CASH to go back to register mode...
Page 3 Change settings for PLU's Press mode button Arrow down to PGM Mode Press CASH button Arrow down to 3.PLU and press No sale Enter 3 and press No sale To Select PLU Enter number and press No sale Press Sub-Total to select next PLU PLU NAME Enter Name with flat keyboard (characters are printed on the bottom left) Repeat until all characters have been selected(up to 20 characters)
Page 4 NE510 Quick Setup.doc - 4 -...
Page 5 Change settings for Depatment's Press mode button Arrow down to PGM Mode Press CASH button Arrow down to 1.Department and press No sale Enter 1 and press No sale To Select DEPT Enter number and press No sale Press Sub-Total to select next DEPT DEPT NAME Enter Name with flat keyboard( characters are printed on the bottom left of PLU buttons)
Page 6 NE510 Quick Setup.doc - 6 -...
Page 7 Changing Receipt Message Header(LOGO message) Press mode button Arrow down to PGM Mode Press CASH button Arrow down to 31.Text Logo and press No sale Enter 31 and press No sale Arrow down to select line to change Enter characters with flat keyboard (characters are printed on the bottom left of PLU buttons) Press CASH Press No Sale to exit...