Page 2
Product overview Product description https://hub.trotec.com/?id=44658 The Carbide hole saw set is ideal for hole circle cuts with a cutting depth of up to 25 mm. It is particularly suitable for Also observe the instructions for your tool, particularly the safety materials such as stone, tiles, concrete or plaster. The chapter.
Page 3
1, 2, 3, 4 Disposal in compliance with official regulations. ð Mounting the saw ring (5, 6) to the hole saw holder (10 mm shaft) 5, 6 4. Screw the lock nut (10) on the hole saw holder (7, 8) and tighten the lock nut. hole saw set carbide...