JVC AV-21BX19 Instructions

COLOUR TELEVISION INSTRUCTIONS
This illustration shows AV-21BX19.
The illustrations of AV-21BX19 is used in this instruction manual for explanation purpose.
Your TV may not look exactly the same as illustrated.
© 2009 Victor Company of Japan, Limited
Safety Precautions
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING AND •
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
•
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.
• The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
• Do not allow objects or liquid into the cabinet
openings.
• Operate only from the power source indicated on
the rear of the TV.
• Avoid damaging the power cord and main plug.
When unplugging the TV, grasp the main plug.
Do not pull on the power cord.
• This TV can be turned on/off power by
connecting/disconnecting the AC plug into AC
outlet. While this TV is being installed, enough
space should be reserved for connection/
disconnecting the AC plug into AC outlet by hand.
• The surface of the TV screen is easily damaged.
Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with
a soft dry cloth. Never rub it forcefully. Never use
any cleaner or detergent on it.
• In the event of a fault, unplug the unit and call a service
technician. Do not attempt to repair it yourself or remove the
rear cover.
1
ENGLISH
AV-21BX19
AV-21BX19B
AV-21QX19
AV-21SX19
GGT0322-001A-H
0609SCT-NF-MT
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around the
TV of more than the minimum distances as shown.
If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer
of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the
supporting furniture.
• Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture
to reach the television or its controls.
• To prevent the TV * This illustration shows AV-21BX19.
from falling thread
Hole for belt
the belt through the
hole on the back
cover and secure it to
Belt
the TV rack, etc.
(not supplied)
Screw (not supplied)
Remote control buttons and functions
Turn on / off (standby) the TV
Select ECO MODE
Set OFF TIMER
Select PICTURE MODE
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
PROGRAMMED!
Press and hold
• When Main Power off, Return plus program is clear.
If you want to change channel setting for Return plus
program, you can registered the new channel for Return
plus program without Main Power off.
RETURN function
If you have not set or have cancelled the RETURN PLUS
channel, this will return to the previously viewed channel.
Operating the menus
Channel information
TV buttons and functions
* This illustration shows AV-21BX19.
1 3 4 5
�����
�� �����
V L / MONO R
IN (VIDEO-3) MENU - CHANNEL + - VOLUME +
EXIT
2 7 6
Connections
• Ensure to turn off all equipments including the TV
WARNING
before connecting the AC mains plug to the AC
outlet.
• Connection an aerial and VCR / DVD player
* This illustration shows AV-21BX19.
TV rear
VHF/UHF
terminals
75-ohm
outdoor
Video output
coaxial cable
aerial
Audio (not supplied)
output
(Connect
directly if
not using a
RF output
VCR)
Aerial cable
(Connect via a VCR)
Rear of VCR RF input
• When connecting to
COMPONENT (VIDEO-2) input,
VCR (for playing)
depending on the connection,
DVD player
(composite signals)
choose the appropriate video
input using the menu.
DVD player (with component video signals input)
• Connecting to the front video input terminal
TV game or Camcorder
V L / MONO R
IN (VIDEO-3)
• After all the connections have been made, insert the
main plug to the AC outlet.
• Insert two batteries by following
the and polarities and inserting the
first.
• Use AA/R6/UM-3 dry cell batteries. (not supplied)
• If the remote control does not work properly,
fit new batteries.
WARNING:
Batteries shall not be
exposed to excessive heat
such as direct sunshine, fire
or the like.
Select programme number
For two digits channel number,
Press the number 0-9 buttons.
Select TV or video input
Turn the volume off / on
Volume control, Turn off muting
Change Channel
For Hyper Scan, press and hold the button PR changes
without changing the picture screen. Once you release the
button, the picture of the selected PR will appear.
Video/Audio input 7POWER lamp - Indicates the TV's status.
1
Display on-screen menu / No colour : Turn off the main power.
2
Exit after finish setting Red : Turn on the main power.
Change channel / Turn on TV Note: When you turn off the power switch while
3
from standby mode. TV is in standby mode, the POWER Lamp
Volume control will go off in 5 -10 seconds. When you
4
Remote control sensor operate the TV, POWER Lamp will blink.
5
Main power on/off
6
Initial setting
1 Turn on the TV.
1. Select the desired language
LANGUAGE ENGLISH by press 1 / 2 button.
AUTO PROGRAM
u
PR 02
SKIP OFF
FINE 193.25 MHz
SEARCH u
SET UP menu appears.
2 Automatically register channels. (AUTO PROGRAM)
LANGUAGE ENGLISH
AUTO PROGRAM
PR
or
SKIP
FINE 193.25 MHz
SEARCH
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
To stop or wait until AUTO PROGRAM finishes
Check what was registered.
3
LANGUAGE ENGLISH
AUTO PROGRAM
u
or
PR 02
SKIP OFF
To complete
FINE 193.25 MHz
SEARCH u
Setup Tour
•
To restart Setup Tour after above setup has completed
(While the cursor is pointing to
PICTURE MODE and within 3 seconds)
end
If this symbol
is shown, it is
only valid in the
European Union.
u
02
OFF
u
75%
2